Stamas front fender 28 mm forks

Reference: 3009

Brand: STAMAS

Couple lever brake Stamas

Pair of Stamas brake levers, for mechanical cable brakes. The Stamas brake levers are adjustable, the distance of the lever from the knob is adjustable by means of a special screw. Compatible with 22mm half handlebars.

Reference: 8005

Brand: STAMAS

Rear axle factory Stamas

Rear axle factory Stamas 

Reference: meteor36cs

Brand: Tecnominimoto

Piston diameter 36 Meteor for Cs Iame 40cc

Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...

Reference: TCM334

Brand: Tecnominimoto

Flat piston air head 50 cc for Tcm Bzm Or

Cylinder head 50 cc air-cooled with flat piston, compatible with Bzm, Or, Tcm.

Reference: GHR 007.001

Brand: GHR

Gasket oring viton discharge 5 pcs for flange Ghr

Viton exhaust oring gasket 5 pieces for flange Ghr

Reference: 143.420.001

Brand: POLINI

Polini 910 rear brake caliper lever with spring 143.420.001

Polini 910 rear brake caliper lever with spring. Polini 910 mini bike rear brake caliper lever with return spring included. Polini Code: 143.420.001

Reference: FM10022-10

Brand: Formula

Formula front axial caliper

Formula axial caliper for minibikes and minicross. Pads included. 5 mm tube ring connection. Distance between fixing holes: 55 mm. Caliper thickness: 42 mm.

Reference: 143.070.002

Brand: POLINI

Minimoto carter engine 6,2 hp Polini 143.070.002

Pair of Polini 6.2 hp minibike engine casings. Polini code: 143.070.002

Reference: Rac-sens-temp-mini

Brand: XRACING

Minimoto water temperature sensor connection in red ergal

Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...

Reference: Avv-mini-cina-metallo

Chinese minimoto starter gear

Chinese minimoto starter gear. Universal Chinese mini motorcycle starter metal gear, the metal gear allows you to avoid damage to the starter during starting, and extends its life.

Reference: 143.075.010

Brand: POLINI

Polini clutch side closed crankcase for reverse engine 143.075.010

Polini clutch side closed crankcase for reverse engine 143.075.010

Reference: GHR 066.001 - 143.270.016

Brand: GHR

Intake manifold Ghr

Rubber intake manifold Ghr diameter 21 mm. Specific manifold for minibikes with Ghr engine and phbg carburettor.

Reference: 143.600.003

Brand: POLINI

Polini reverse engine coil 143.600.003

Polini reverso minibike coil. Original coil for Polini reverse engine. Code: 143.600.003

Reference: 112.010.75

Brand: GRC

Impeller pump water increased d.35 GRC

Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.

Reference: 143.250.001

Brand: POLINI

Polini minimoto head support silentblock 143.250.001

Polini mini bike head support silentblock. Polini Code: 143.250.001

Reference: 115.010.022

Brand: BZM

Gasket kit for Bzm 40cc 2t air engine

Gasket kit for Bzm 40cc 2t air engine. Gasket kit for Bzm minimoto engine, diameter 36 mm, 40cc, air-cooled. Bzm gaskets compatible with Bzm 420 and 620 engine crankcases. Diameter: 36 mm. Displacement: 40cc. Crankcase: 420 and 620. Cooling: AIR.