Xmotorstore Payments
Aluminum rear mechanical brake caliper support kit for minimoto Dm.
Code: 001002R017F0
Aluminum rear mechanical brake caliper support kit for minimoto Dm.
Code: 001002R017F0
Reference: 001002R026A0
Brand: DM
Pair of rear wheel bearings and spacer 120 DM. DM Code: 001002R026A0
Reference: 001002R04600
Brand: DM
Soft rear brake line with sheath for Dm minimoto. DM Code: 001002R04600
Reference: 001002SP095C
Brand: DM
Rear brake caliper support threaded pin for aluminum swingarm Dm. Threaded pin for swingarm Dm. Dm code: 001002SP095C
Reference: 001002R017E0
Brand: DM
Minimoto mechanical rear brake caliper Dm. DM Code: 001002R017E0
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: Xmts.inox.40
Brand: XRACING
Stainless steel xmotorstore exhaust manifold, for Cs Iame 40cc engine. Made by hand in Italy, the union of the first choice stainless steel material and the craftsmanship make the collector performant for racing use and resistant to any extreme conditions. The heat resistance and the ability to quickly dispose of the exhaust gas make the collector...
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reference: 088
Brand: DM
Plastic minibike tank cap, compatible with: Dm, Stamas, Blata. The minibike cap is knurled, to allow an optimal grip when opening and closing.
Reference: BZM-024197
Brand: BZM
Pair of oval Bzm flow diverter inserts. Original Bzm flow diverter inserts, with oval hole.
Reference: 143.075.007
Brand: POLINI
Pump cover and pinion steel. Polini Code: 143.075.007
Reference: FM6005-DMT
Brand: Formula
Formula radial front brake system for minimoto, complete with pads, oil and pre-bled. High performance and reliability.
Reference: GHR 034.002
Brand: GHR
G-Radius black plate adjustment kit (wheel with movable pin and pusher)
Reference: pastiglie.XR
Brand: XRACING
New brake pads Formula by Xmotorstore.com, increased and sintered. MADE IN ITALY Durability and reliability and guaranteed. Designed and tested for use race and training. Suitable for all Formula brakes hydraulic front and rear. Compatible on all hydraulic pliers formula, dm, grc, polini, Stamas and others.
Reference: 143.465.001
Brand: POLINI
Air filter for Polini minimoto, the filter is compatible with the SHA 14 carburettor. Polini code: 143.465.001
Reference: GHR 069.001
Brand: GHR
Kit gaskets reed valve crankcase crankcase/pack
Reference: clt.min.cin
Brand: XRACING
Chinese minimoto manifold for Sha carburetor. The aluminum manifold for Chinese minimoto is compatible with all Chinese air-cooled minimoto engines, allows the assembly of the SHA 16 Dellorto carburetor. The manifold is interchangeable with the original plastic.
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: GHR 508.010
Brand: GHR
GHR exhaust connector for 40cc air-cooled flanged engines. Outer diameter 28 mm, 3 mounting holes (Ø 6 mm). Inner diameter options: 10 / 12 / 14 / 15 mm.
Reference: 143.020.006 A B C D
Brand: POLINI
Polini piston diameter 40 flat head for 50cc with segment, the piston is included with a pin. Polini Code: 143.020.006
Reference: GHR 501.003
Brand: GHR
40cc air Ghr engine (without carburettor, filter and muffler). 40cc air Ghr engine, the engine does not include the carburetor and exhaust. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes. GHR minimoto engine weight: 5180 grams
Reference: 112.480.00
Brand: GRC
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition. Grc Code: 112.480.00
Aluminum rear mechanical brake caliper support kit for minimoto Dm.
Code: 001002R017F0
