- On sale!
- Reduced price
- New
Xmotorstore Payments
rubber kit for fairing Dm 5 pieces. Suitable for original fairings, they allow to reduce the vibrations on the fairing.
DM Code: 001002R003B0
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: 001002R003C0
Brand: DM
Hull spacer kit Dm 5 pieces. Dm code: 001002R003C0
Reference: AKMM013002-50
Brand: Tecnominimoto
Bzm minibike steering damper rod. Replacement kit for the overhaul of the steering damper rod for minibikes, compatible with: Bzm, Tcm, Grc. The shock absorber rod includes the 2 sealing O-rings. We recommend purchasing the AKMM013002-60 kit in combination.
Reference: TCM K2012
Brand: Tecnominimoto
TCM masses diameter 86mm. The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells. Currently the best on the market for duration, yield, and gluing. Recommended 2.6 mm springs...
Reference: 1023
Brand: STAMAS
Water tank support bracket for sr race factory Stamas frame
Reference: 112.010.69
Brand: GRC
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: 003
Brand: DM
Fairing Chassis Model. X Shock absorber Fg
Reference: 9003
Brand: STAMAS
Antivibration grommets with spacers and screws for Stamas standard radiator
Reference: 001002R002D0
Brand: DM
Rear wheel axle with DM nut up to 2007 DM Code: 001002R002D0 Rear wheel axle with DM nut up to 2007
Reference: 1015 R S
Brand: STAMAS
Replacement pair of Stamas adjustable footrest supports
Reference: GHR 071.024
Brand: GHR
Reed Ghr carbon braided 0.24 high tech
Reference: FD-O027-00
Brand: Formula
Formula O-ring for minimoto caliper. Formula minimoto and minicross braking system O-ring. The Formula O-ring is positioned under a conical screw in the caliper. Formula O-ring size: Outer diameter: 4 mm. Inner diameter: 2 mm. Thickness: 1 mm. Attention: the measurements are indicative, check for application and compatibility. Attention: 1 piece.
Reference: 010.0743
Brand: POLINI
Minimoto starter handle, universal for minibikes with pull starter with rope. Polini Code: 010.0743
Reference: 001002R04700
Brand: DM
Soft throttle wire for minimoto, this throttle cable allows you to reduce the force required to rotate the throttle, allowing you to accelerate more smoothly and quickly. The gas cable is 90 cm long, with a diameter of 1 mm. DM Code: 001002R04700
Reference: 143.705.008
Brand: POLINI
Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...
Reference: 112.486.15
Brand: XRACING
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: 143.315.001
Brand: POLINI
Minibike piston pin lock 10x0.8 form A. Polini code: 143.315.001 Pin clip for minibike piston pin, universal, with diameter 10x0.8 and shape A.
rubber kit for fairing Dm 5 pieces. Suitable for original fairings, they allow to reduce the vibrations on the fairing.
DM Code: 001002R003B0