Xmotorstore Payments
Stamas rear fender sr r factory.
Code: 6008/12
Reference: 6007
Brand: STAMAS
Front fender sr r factory Stamas. Material: Resin Weight: 126g
Reference: 1027
Brand: STAMAS
New Stamas 2023 swingarm Compatible with STAMAS from 2012 to 2023
Reference: 6007/28
Brand: STAMAS
Stamas front fender for 28 mm diameter forks
Reference: 058DM
Brand: DM
Rear Hub 116 Mm 5 Holes Sprocket with bearings
Reference: 2011
Brand: STAMAS
Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.
Reference: 2020x2
Brand: STAMAS
Stamas clip-on handlebars for 25 mm forks, handlebar diameter 22 mm.
Reference: 112.480.00
Brand: GRC
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition. Grc Code: 112.480.00
Reference: cod. 4506
Brand: PBR
Universal minimoto sprocket in Ergal Black color. The sprocket is to be considered as 3 holes, as the 6 holes are the combination of two types of attack with 3 offset holes. Compatible for: Crown for DM minimoto Crown for GRC minimoto Crown for STAMAS minimoto Crown for BLATA minimoto Crown for MARTINI minimoto Crown for BMS minimoto Crown for universal...
Reference: 143.075.010
Brand: POLINI
Polini clutch side closed crankcase for reverse engine 143.075.010
Reference: BZM-018010
Brand: BZM
BZM Racing gasket kit for Ø36/40 cylinder, compatible with 40cc water-cooled minimoto engines. Perfect fit for BZM 40cc H2O.
Reference: 263.104.00
Brand: Blata
Blata minimoto front disc. Front disc for Blata minimoto, standard, non-floating version.
Reference: TCM0511
Brand: Tecnominimoto
CS Racing water pump overhaul kit. The CS Racing minibike water pump overhaul kit includes: Water pump bearings. Specific bearings for CS pump: 22x8x7 mm. O-rings. Water pump oil seal. Water pump impeller. Water pump circlip.
Reference: 143.395.020
Brand: POLINI
Polini minimoto rear brake wire, for mechanical brakes. Polini code: 143.395.020
Reference: 143.803.006
Brand: POLINI
Polini 911 minibike white rear tail. Polini code: 143.803.006
Reference: GHR 046.001
Brand: GHR
Bell centering bush kit Ghr. The minibike bell bushing is used to keep the bell centred, by fixing the pinion.
Reference: Rac-sens-temp-mini
Brand: XRACING
Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...
Reference: GHR 507.012
Brand: GHR
GHR exhaust venturi flange 12 40cc air. Code: GHR 507.012 12 mm flanged cylinder insert, the GHR flange complies with the relevant championships.
Reference: 143.415.006
Brand: POLINI
Polini 910 RS minimoto fork plates. Fork plates 2WB for straight steerer. Polini Code: 143.415.006 Polini minimoto fork plates in aluminum. Color: gray Total width: 170 mm. Hole diameter for stem: 24 mm. Steering stem pin diameter: 10 mm. Fork stem center distance: 134 mm. The kit includes the necessary screws for assembly.
Stamas rear fender sr r factory.
Code: 6008/12
