Xmotorstore Payments
Universal mini bike stand resistant and practical stand for minimoto support.
DM Code: 001002R075B0
Universal mini bike stand resistant and practical stand for minimoto support.
DM Code: 001002R075B0
Reference: 001002R07500
Brand: DM
Workshop mini bike stand, specific model for Dm. The Dm work stand is necessary to be able to access the assembly and disassembly of each part, the stand is rotatable. DM Code: 001002R07500
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Reference: 1010
Brand: STAMAS
Chain tensioner factory Stamas. ATTENTION: Color may change without notice.
Reference: 143.160.015
Brand: POLINI
Plate for clutch 2 masses reverso engine
Reference: 112.486.32
Brand: GRC
GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32
Reference: meteor36cs
Brand: Tecnominimoto
Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...
Reference: 076
Brand: DM
Handlebar vibration dampers Dm red. The Dm mini bike rockers are used to stabilize and protect the handlebar from impacts.
Reference: 116
Brand: DM
Dm support for Formula floating radial rear hydraulic caliper New lighter version, weight 83g Dm Code: 116
Reference: 7013
Brand: STAMAS
Spacer outside sprocket side for 5007P Stamas hub
Reference: 3113555
Brand: Malossi
Malossi thermal unit 50 cc h2o for mini bikes. Malossi code: 3113555. Malossi cylinder kit diameter 40 mm, 50cc for Polini 2t mini bike engine. Malossi cylinder kit for pocket bikes, features: ALUMINUM CYLINDER: Cylinders obtained by gravity casting in specific steel shells. Material: primary aluminum alloy with high silicon content, tempered and...
Reference: Pistone IAME 50cc
Brand: CS Racing
Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: Stms.sup.ped
Brand: STAMAS
Minimoto Stamas Footpeg supports first series.
Reference: Bzm-003000
Brand: BZM
Clutch weights kit 2 masses Bzm. Kit of weights of 2 grams M8 for minimoto clutch, the weights for minimoto weights increase the thrust when opening the clutch.
Reference: 143.730.021+143.730.022
Brand: POLINI
Pair of 6.5 inch Polini minimoto rims for 910 and 911 5-spoke. Front rim and rear rim 6.5 inches ideal for modifying the Polini minibike going from 5 inches to 6.5 to mount the rims it is necessary to mount custom spacers on the sides of the bearings, not included in the kit, the rear rim is already included with a pulley for pump transmission water for...
Reference: 143.000.029
Brand: POLINI
Minimoto Polini 910 Rs hull with 4.2 HP air motor, 5-inch wheels, white colour. Polini code: 143.000.029. Minimoto Polini 910 S hull 4.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 2009
Brand: STAMAS
Semi handlebar 24 mm with Stamas bracelet, 1 piece. Fork stem clamp diameter: 24mm. Semi handlebar diameter: 22mm standard.
Universal mini bike stand resistant and practical stand for minimoto support.
DM Code: 001002R075B0
