Minimoto bell Cs racing m10 (81 80 79 78)

Reference: 143.355.003

Brand: POLINI

Or held for rims 6.5" (3,53X145,65) 143.355.003

Or seal for Polini 6.5 "(3.53X145.65) rim. Polini Code: 143.355.003

Reference: zoc100.0504

Brand: Zocchi

Minimoto clutch shim kit

Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).

Reference: 143.600.001

Brand: POLINI

Polini minimoto high voltage coil 143.600.001

High voltage Polini minimoto coil, suitable for 4.2 and 6.2 Polini engines. Polini Code: 143.600.001

Reference: 112.273.00

Brand: GRC

Minimoto cooler Grc of elbow series

Grc series curved minimoto radiator. Including anti-vibration mounts.

Reference: GHR 001.002

Brand: GHR

Ghr engine gp1 h2o 50 factory racing

Complete Ghr minimoto engine gp1 h2o 50 factory racing. The engine is supplied complete with muffler, silencer.

Reference: GHR 501.001

Brand: GHR

Complete Ghr engine 40cc air

Complete 40cc air Ghr engine ready to be installed on the minimoto. Ghr minimoto engine complete with muffler, silencer, 15mm carburetor, venturi and filter. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.

Reference: 143.035.002

Brand: POLINI

Polini cylinder h2o gaskets series d.40

Polini gasket set cylinder h2o d.40 Polini code 143.035.002

Reference: 001002SP089A

Brand: DM

Midi GP Dm fork plates

Minimoto fork plates pin Dm, for midi version. Dm code: 001002SP089A

Reference: 2012 I

Brand: STAMAS

Pair fork Stamas factory mini d.25 inox

Pair of Stamas factory mini fork tubes diameter 25 mm in stainless steel.

Reference: Kit-revisione-fg-gubellini

Fg Gubellini minibike steering damper overhaul kit

Fg Gubellini minibike steering damper overhaul kit. Kit for overhauling the steering damper for minibikes, consisting of: Complete OR kits. Oil seal kit. Specific hydraulic oil for steering damper. Attention: photo purely illustrative, the actual kit differs from the images. Attention: we recommend contacting a specialized workshop to assemble the kit.

Reference: 2023

Brand: STAMAS

Pair of aluminum spacers for 25 mm fork

Pair of aluminum spacers for 25 mm fork

Reference: IMB-01000-C

Brand: CS Racing

Cs Iame engine carter 50cc 40cc

Crankcase Cs racing Iame for 50cc 40cc minibike engine. New minimoto engine crankcase developed to achieve maximum performance, engine crankcase compatible with 40cc and 50cc. Engine crankcase weight cs: 1052 g

Reference: 2020x2

Brand: STAMAS

Pair of semi handlebars Stamas d.25

Stamas clip-on handlebars for 25 mm forks, handlebar diameter 22 mm.

Reference: 001002R006B0

Brand: DM

Pair of air head spacers DM

Pair of Dm spacers for air head. Spacers for air motor on frame Dm. Dm minimoto spacers measures: Long side: 51 mm Short side: 30.5mm Hole: 8 mm Outside diameter: 16 mm

Reference: GHR 024.001

Brand: GHR

Axis coupling 14/5 X 32.3 piston rod Ghr

Coupling shaft 14/5 X 32.3 for Ghr connecting rod compatible with Bzm, Iame, Cs, Ghr shafts.

Reference: Albero-cs

Brand: CS Racing

Cs crankshaft racing rod cnc (39.5 to 39.9)

Cs racing shaft with cnc blade connecting rod. Available in 39.5 and 39.9 mm stroke. Specific shaft for mini bikes, compatible with Iame, Cs, Polini 6.2 engines and others.