Screw kit for hull and monocooque Stamas

Reference: 001002SP1280

Brand: DM

Kit factory Dm stickers

Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.

Reference: IMG-02000-15

Brand: CS Racing

Cs reed valve

Reed valve Cs for minimoto. The Cs reed valve pack allows greater performance thanks to the viton coating. Divert flows not included.

Reference: FM10191-40

Brand: Formula

Formula minibike front braided brake hose M8 - M6 FM10191-40

Formula minibike front braided brake hose M8 - M6. Formula code: FM10191-40 Formula hydraulic front brake hose for minibikes, specific for versions from 2023 onwards, with M8 pump side connection and M6 caliper connection.

Reference: 143.190.002

Brand: POLINI

Set of bearings with caps for scooter steering Polini 143.190.002

Set of bearings with caps for Polini scooter steering. Polini code: 143.190.002 Polini scooter steering bearings, last pieces available.

Reference: 120

Brand: DM

Dm handlebars complete with clamp diameter 28 mm

Dm handlebars complete with clamp diameter 28 mm

Reference: 112.191.25

Brand: GRC

Fork cap diameter 25 mm Grc

Red aluminum cap for 25 mm diameter forks. Grc Code: 112.191.25

Reference: 112.238.21

Brand: GRC

Upper engine pin 8x160 midi rrz-3 Grc

Upper engine pin 8x160 midi rrz-3 Grc 

Reference: GHR 010.001

Brand: GHR

Kit gaskets Ghr complete engine 50cc

Complete 50cc engine Ghr gasket kit. The kit includes: - Cylinder base gaskets Ghr: 0.05 - 0.10 - 0.20 - 0.50 - Oring studs 5 pcs - Upper and lower dome oring (viton) 1 pc each - Oring head collision 1 pc - Oring viton exhaust 1 pc - Manifold and reed valve gaskets 1 pc each

Reference: GHR 016.001

Brand: GHR

Couple carter engine factory Ghr

GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...

Reference: 112.153.05

Brand: GRC

Racing Brake Pads for PLK Radial Caliper – 2 Holes – Code 112.153.05

Sintered brake pad pair for PLK radial mechanical or hydraulic calipers. 2-hole mount with 22 mm spacing. Code 112.153.05.

Reference: cerchi-blata-std

Brand: Blata

Blata minimoto rims standard

Blata minimoto rims. Original Blata rims in standard version. The Blata minimoto rim kit includes: Blata 2.1x6.5" front rim Blata 2.3x6.5" rear rim Blata minimoto rims. Original Blata rims in standard version. The Blata minimoto rim kit includes: Blata 2.1x6.5" front rim Blata 2.3x6.5" rear rim PLEASE NOTE: MADE TO ORDER.

Reference: ZOC.100.0051

Brand: Zocchi

Zocchi clutch for 3.5 hp Chinese minimoto

Zocchi clutch for 3.5 hp Chinese minimoto. Clutch elaboration for Chinese minimoto with 3.5 hp engine.

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 1011

Brand: STAMAS

Front fairing support tube sr Stamas

Front fairing support tube sr Stamas

Reference: 0.100.044.01

Brand: STAMAS

Chassis Stamas minibike midi Sr air race factory

Stamas SR Junior minimoto cycle for air motor. Features Stamas Junior air: Forks diameter 28 mm Hydraulic brakes Complete raw hull Quick throttle control Dual mass shutdown Rims machined from solid Pmt T41 tires Attention this article requires a delivery time of 15 working days

Reference: 143.070.002

Brand: POLINI

Minimoto carter engine 6,2 hp Polini 143.070.002

Pair of Polini 6.2 hp minibike engine casings. Polini code: 143.070.002