- On sale!
- New

Xmotorstore Payments
Curved racing DM mini-bike radiator
Top width 21 cm
Bottom width 17 cm
Thickness 5 cm
Curved racing DM mini-bike radiator
Top width 21 cm
Bottom width 17 cm
Thickness 5 cm
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 132
Brand: DM
Increased Dm minibike radiator, the oversized Dm radiator is dedicated to racing minibikes, it allows better engine cooling even in the most extreme conditions of use. Radiator weight Dm: 566 grams Pipe connections: 10 mm Attention: Artisan radiator handmade to order, delivery time 30 days.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 143.034.003
Brand: POLINI
Reverso Polini h2o engine gaskets series Reverso Polini h2o engine gaskets series for minimoto Code: 143.034.003
Reference: FM40064-20
Brand: Formula
Formula front pump lever fixing screw kit for minibikes and minicross. This pin is an original Formula replacement, and is compatible with original implants.
Reference: 143.340.025
Brand: POLINI
Polini minimoto engine support bracket, in metal, with rubber silentblocks and metal coupling. Head fixing holes center distance 55 mm. Central pin passage hole 8 mm. Polini Code: 143.340.025
Reference: 143.730.014
Brand: POLINI
Air valve for front racing rim for Polini minimoto. Polini code: 143.730.014
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: M099341-V00
Brand: PMT TYRES
Tubeless valve for wheels 6.5" compatible with minimoto wheels Dm, Stamas, Grc.
Reference: 143.705.009
Brand: POLINI
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009. Complete spring tie rods for 2-mass clutch for pocket bikes.
Reference: 2016 D25
Brand: STAMAS
Support for factory hydraulic front brake caliper plus screws, for 25 mm diameter forks. The Formula radial stamas caliper support is entirely machined from solid, with CNC machining.
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: KT0.0029
Brand: CS Racing
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Reference: FM10125-20
Brand: Formula
Formula front right brake pump, the Formula brake pump compatible with minibikes and minicross. Formula Code: FM10125-20
Reference: FM10093-40 treccia
Brand: Formula
Braided hose for mini-bike front Formula hydraulic brake. Greater resistance to heat and pressure, ideal for racing minimoto that need high performance. Tube length: 440mm Ring attachment: 6 mm Tube diameter: 5 mm Code: FM10093-40
Reference: IMH-04000-40-C
Brand: CS Racing
Cs muffler for h2o engine (40cc or 50cc).
Reference: FM40024-10
Brand: Formula
Kit screws and o-rings for Formula minimoto minicross radial front caliper. Formula Code: FM40024-10
Reference: 143.680.001
Brand: POLINI
Revision starter kit Polini minibike. Polini code: 143.680.001
Reference: 143.160.014
Brand: POLINI
Complete clutch 2 masses for Polini Reverso mini-motorcycle engine. Polini code: 143.160.014
Curved racing DM mini-bike radiator
Top width 21 cm
Bottom width 17 cm
Thickness 5 cm