Xmotorstore Payments
Stamas front brake disc 148 mm diameter floating.
Stamas front brake disc 148 mm diameter floating.
Reference: FM6005-DMT
Brand: Formula
Formula radial front brake system for minimoto, complete with pads, oil and pre-bled. High performance and reliability.
Reference: 5009
Brand: STAMAS
Bushings kit for front Stamas floating disc.
Reference: 6009
Brand: STAMAS
Disc protection Stamas sr r factory
Reference: 5006
Brand: STAMAS
Front hub Stamas factory including spacer and bearings.
Reference: DD.VF.MIN
Brand: XRACING
Clutch nut / minimoto flywheel, compatible with engine: Polini, Cs, Ghr, Bzm.
Reference: 058DM
Brand: DM
Rear Hub 116 Mm 5 Holes Sprocket with bearings
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 143.750.005
Brand: POLINI
Polini 910 RS minimoto front brake caliper. Polini Code: 143.750.005 Polini 910 RS hull minimoto brake caliper, compatible with 5-inch and 6.5-inch versions.
Reference: 022003
Brand: BZM
Bzm reed valve pack for minimoto. Bzm reed valve pack for racing minimoto, compatible with engine crankcases: Bzm 620, Bzm 690, Polini 6.2HP.
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: 4014
Brand: STAMAS
Cnc support for rear brake caliper mechanical factory Stamas
Reference: 260.018
Brand: POLINI
Polini minimoto tie rods and spare parts. Compatible with 2-mass clutch. Polini Code: 260.018
Reference: IMA-01000-50
Brand: CS Racing
IAME 50cc H2O cylinder H2O 50cc mini-bike cylinder jacketed with cast iron barrel, made by CNC to guarantee the maximum precision of the transfer, thus obtaining a product of the highest performance and quality. The kit is supplied with the cylinder and the relative water connections. The piston is not present.
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: 2KK6202BCS25
Brand: XRACING
Koyo 2KK6202BCS25 calibrated racing minibike engine bearings. Special bearings for minibike racing engines, specific for racing engines, the manufacturing with tolerance calibration on the bearing allows perfect sliding of the crankshaft, without vibrations and with crazy performances. Compatible for: Polini minibike engine bearings. Ghr minibike engine...
Reference: A01530
Brand: DM
DM front fairing bracket for minimoto, designed for bottom-mounted steering dampers.
Reference: GHR 559.010
Brand: GHR
Ghr expansion for 40cc air motor (10 12 15 and free). Available to choose between: Ghr expansion for 40cc flange 10 air motor. Ghr expansion for 40cc flange 12 air motor. Ghr expansion for 40cc flange 15 air motor. Ghr expansion for 40cc flanged air motor.
Reference: 2006
Brand: STAMAS
Pair of 24 mm Stamas standard half handlebars
Reference: 001002SP095A
Brand: DM
Pair of dm swingarm register keys dm swingarm keys dm keys dm swingarm keys dm register keys Dm code: 001002SP095A
Stamas front brake disc 148 mm diameter floating.
