Xmotorstore Payments
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket.
Compatible with all minimoto sprockets.
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket.
Compatible with all minimoto sprockets.
Reference: TMC486
Brand: GRC
chain tool minimoto for all minimoto chain. Universal minimoto chain breaker for all minimoto chains. Made in Italy with high quality standards. Compatible with standard and racing pocket chains.
Reference: 112.486.32
Brand: GRC
GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32
Reference: 112.486.04
Brand: GRC
Clutch locking key for minimoto 2 and 3 masses, Quick coupling. Quick, simple and effective clutch stop wrench to work on the clutch locking it to the crankcase, compatible with Polini, Iame, Cs, Ghr. Code: 112.486.04
Reference: 112.486.00
Brand: GRC
2-mass clutch unit extractor. Minimoto clutch extractor for all Italian engines.
Reference: 267000070
Brand: XRACING
Universal flywheel extractor 22x1.5 code: 267000070. This flywheel puller is universal, widely used as a flywheel puller for minimoto. Notes: 22x1.5, right-hand thread.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 143.215.001
Brand: POLINI
Series of Polini studs fixing h2o cylinder Length: 98mm Diameter: 6 mm Code: 143.215.001
Reference: 6017
Brand: STAMAS
Complete Stamas sr r factory fairings kit including mudguards and raw disc protection.
Reference: 143.195.002
Brand: POLINI
Minibike roller cage 10x13x14.5 mm. Roller cage for 10mm gudgeon pin, 13mm outer diameter, 14.5mm length.
Reference: 2035 6 18NC
Brand: PBR
Pinion minimoto m8 z6. The minibike pinion M8 Z6 is universal for Italian minibikes.
Reference: 6011
Brand: STAMAS
Pair of threaded pull bushings for hull
Reference: 143.801.049
Brand: POLINI
Polini 910 minibike fairing black 143.801.049. Polini 910 s right and left minibike fairing, in glossy black colour, compatible with all Polini 910, S, Rs. Polini code: 143.801.049 Left and right pair.
Reference: FRZ.HM2
Brand: CS Racing
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: GHR 034.002
Brand: GHR
G-Radius black plate adjustment kit (wheel with movable pin and pusher)
Reference: 143.020.002
Brand: POLINI
Polini minimoto piston d.36 mm for 40cc cod. 143020002 Select the correct measure SEL. A - B - C - D Shell: 2863 Standard Diameter (D): 36 Compression (C): 20 Head shape: ROUNDED Head Size (M): 1.5 Total Length (L): 43.5 Segments Type: AC4CR Number of Segments: 1 Segment Height: 1 Pin (d): 10 Pin Length: 29 Version: FUSO
Reference: tcm201836
Brand: Tecnominimoto
TCM rear red hub for DM (114 mm). For hydraulic brakes. Compatible with all original Dm rims, with flare to apply the Or water pump transmission pulley.
Reference: tcm-014002
Brand: Tecnominimoto
Bzm Tcm exhaust manifold. Exhaust manifold for minibikes, compatible with Bzm, Grc, Tcm mufflers. Standard version, with standard curve.
Reference: GHR 508.010
Brand: GHR
GHR exhaust connector for 40cc air-cooled flanged engines. Outer diameter 28 mm, 3 mounting holes (Ø 6 mm). Inner diameter options: 10 / 12 / 14 / 15 mm.
Reference: Ariane-K2Re
Brand: Arianetech
Ariane K2Re was designed in response to the models that are the reference among the current minibikes, but in an electric version. For this reason it is equipped with an electric unit with a maximum power of 6.5 kW (8.5 HP), adjustable in multiple parameters via a USB port that connects to a laptop to adapt to the needs of every rider, from the beginner...
Reference: 001002R04800
Brand: DM
Minibike brake wire 100 cm. DM Code: 001002R04800
Reference: 143.035.003
Brand: POLINI
Polini minibike cylinder gasket set. Polini code: 143.035.003. Gasket kit for Polini minibike cylinder, the set includes gaskets with thicknesses: 0.20-0.25-0.30-0.40.
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket.
Compatible with all minimoto sprockets.
