Xmotorstore Payments
Stamas midi rear swingarm
standard model 1025
Reference: 6008
Brand: STAMAS
Stamas sr r factory rear fender. Material: Resin Weight: 132g
Reference: 5002
Brand: STAMAS
Stamas cnc racing wheel 60mm Stamas wheel weight 515g
Reference: 5007
Brand: STAMAS
Rear hub Stamas standard / factory including spacer and bearings
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: 091
Brand: DM
Hull quick release screw replacement. Dm Code: 091
Reference: 112.103.15
Brand: GRC
Complete front hub for GRC minimoto, long version (94 mm), compatible with hydraulic and mechanical brakes. Code 112.103.15.
Reference: 143.010.015
Brand: POLINI
Polini cylinder with water piston d.36 3 reverse transfers. Polini code: 143.010.015
Reference: 2011
Brand: STAMAS
Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.
Reference: 001002A00500
Brand: DM
Dm minimoto tank support pad (2 pieces).
Reference: 2036 8 18NC
Brand: PBR
Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.
Reference: 1013
Brand: STAMAS
Pair of Stamas seatpost frame pads
Reference: BZM-024197
Brand: BZM
Pair of oval Bzm flow diverter inserts. Original Bzm flow diverter inserts, with oval hole.
Reference: 5013
Brand: STAMAS
Stamas rear hub pulley for water pump drive belt.
Reference: GHR 002.001
Brand: GHR
Ghr cylinder diameter 40 mm, displacement 50cc h2o. Cylinder Ghr 50cc h2o 2-stroke engine.
Reference: 1011
Brand: STAMAS
Front fairing support tube sr Stamas
Reference: 143.740.006
Brand: POLINI
Aluminum support for mini bike tail Polini 910 Rs. Polini Code: 143.740.006
Reference: 5002
Brand: STAMAS
Stamas cnc racing wheel 60mm Stamas wheel weight 515g
Reference: PISTONE IAME 40CC
Brand: CS Racing
Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Stamas midi rear swingarm
standard model 1025
