Xmotorstore Payments
Front hub Stamas factory including spacer and bearings.
Reference: 5002
Brand: STAMAS
Stamas cnc racing wheel 60mm Stamas wheel weight 515g
Reference: FM40024-10
Brand: Formula
Kit screws and o-rings for Formula minimoto minicross radial front caliper. Formula Code: FM40024-10
Reference: GHR 042.001
Brand: GHR
Ghr bell casing in red ergal, compatible with Ghr, Bzm, Iame, Cs. Allows the use of a self-ventilated bell.
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: GHR 069.001
Brand: GHR
Kit gaskets reed valve crankcase crankcase/pack
Reference: 1014
Brand: STAMAS
Pair support platforms Stamas aluminium mini
Reference: 143.270.015
Brand: POLINI
Rubber intake manifold Steel GP3 Polini. Polini code: 143.270.015 Carburetor inlet: 25 mm. Internal connection diameter: 16 mm. Hole spacing: 23.5 37.5 mm.
Reference: GHR 049.001
Brand: GHR
Ghr starter cover in ergal. Compatible with Bzm, Iame, Cs, Ghr engines.
Reference: 143.695.009
Brand: POLINI
Locking key for Polini 2-mass clutch group 143.695.009. Polini clutch locking key for minimoto. The Polini clutch locking key is compatible with all engines that have hole spacing: 74 mm.
Reference: 143.630.007
Brand: POLINI
Engine support pin with nuts minimoto Polini 910 S RS. Polini code: 143.630.007 Upper engine support pin minimoto Polini, model 910 R RS.
Reference: 111A
Brand: DM
Dm minimoto swingarm pads 2 pieces. New Dm pads for aluminum swingarm. The pads must be mounted exclusively with the 2025 chain tie rods, product code 111. This 2025 update of the Dm minimoto, improves the protection of the minimoto, without altering its performance and ease of adjustment.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 143.160.011
Brand: POLINI
Polini minimoto clutch plate 143.160.011. Polini plate for Polini minimoto clutch with 2 masses. Original Polini minimoto clutch spare part.
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: Pistone IAME 50cc
Brand: CS Racing
Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Front hub Stamas factory including spacer and bearings.
