- On sale!
- Reduced price
- New

Xmotorstore Payments
Reference: T41.90+110
Brand: PMT TYRES
Tires PMT T41 90/65-6.5 + 110/55-6.5 COMPETITION TIRES, SUITABLE FOR USE ON DRY TRACK. HARDNESS MIXES: 56 SHORE (MEDIUM - SOFT) RECOMMENDED PRESSURE: FRONT 1.0 TO 1.4 BAR / REAR 1.4 TO 1.9 BAR RUBBER DESIGN: SLICK OPTIMUM TEMPERATURE ASPHALT: 20/30 GRADI IDEAL TEMPERATURE USE: 65 DEGREES
Reference: M099341-V00
Brand: PMT TYRES
Tubeless valve for wheels 6.5" compatible with minimoto wheels Dm, Stamas, Grc.
Reference: 5006
Brand: STAMAS
Front hub Stamas factory including spacer and bearings.
Reference: 5007
Brand: STAMAS
Rear hub Stamas standard / factory including spacer and bearings
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: 112.486.04
Brand: GRC
Clutch locking key for minimoto 2 and 3 masses, Quick coupling. Quick, simple and effective clutch stop wrench to work on the clutch locking it to the crankcase, compatible with Polini, Iame, Cs, Ghr. Code: 112.486.04
Reference: 143.730.021+143.730.022
Brand: POLINI
Pair of 6.5 inch Polini minimoto rims for 910 and 911 5-spoke. Front rim and rear rim 6.5 inches ideal for modifying the Polini minibike going from 5 inches to 6.5 to mount the rims it is necessary to mount custom spacers on the sides of the bearings, not included in the kit, the rear rim is already included with a pulley for pump transmission water for...
Reference: PISTONE IAME 40CC
Brand: CS Racing
Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 335.033.02
Brand: Blata
Collar semi-handlebars for stems 28mm Blata
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 112.010.75
Brand: GRC
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
Reference: 127
Brand: DM
Complete radiator bracket kit for all DM models
Reference: GHR 014.001
Brand: GHR
Ghr 40 / 50cc cylinder block gasket kit. The kit includes: 1 PC CAD 0.05 0.10 0.20 0.50
Reference: 143.160.009
Brand: POLINI
Polini mini-bike clutch 2 masses. Signature for Polini 6.2 and 4.2 hp engine. The clutch was designed with the aim of obtaining a safe, functional product and above all with the possibility of allowing the most varied adjustments thus allowing it to be adapted to the most diverse use requirements. Polini Code: 143.160.009
Reference: 143.395.015
Brand: POLINI
Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015
Reference: 007
Brand: DM
DM black aluminum fork legs for minimoto. 28 mm diameter, 2025 model. Compatible with DM triple clamps from 2020 onwards. Code 007.
Reference: 9005 L
Brand: STAMAS
Side brackets radiator support Stamas race
Reference: 1015 R
Brand: STAMAS
Pair of adjustable Stamas footpeg support
Stamas cnc racing wheel 60mm
Stamas wheel weight 515g