Xmotorstore Payments
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems.
DM Code: 001002R01400
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems.
DM Code: 001002R01400
Reference: 001002R02500
Brand: DM
Pair of front wheel bearings with spacer for DM minimoto. DM Code: 001002R02500
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: GHR 501.003
Brand: GHR
40cc air Ghr engine (without carburettor, filter and muffler). 40cc air Ghr engine, the engine does not include the carburetor and exhaust. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes. GHR minimoto engine weight: 5180 grams
Reference: 143.705.009
Brand: POLINI
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009. Complete spring tie rods for 2-mass clutch for pocket bikes.
Reference: 143.025.002
Brand: POLINI
Segment diameter 36x1 mm for Polini minimoto 40cc air and h2o. Polini code: 143.025.002
Reference: cod. 4428
Brand: POLINI
Polini minimoto sprocket in gold color from 45 to 73 teeth. Specific crown for Polini GP mini bikes.
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 2006
Brand: STAMAS
Pair of 24 mm Stamas standard half handlebars
Reference: 143.002.004
Brand: POLINI
Polini air-cooled minibike engine 4.2 hp, 40cc 2t displacement. Polini code: 143.002.004. The Polini 4.2 hp engine can be installed on all Italian mini-bikes, such as Dm, Grc, Stamas.
Reference: 0H5-5320-00 (USB CABLE COMP.)
Brand: Arianetech
USB cable for Ariane K2RE minibike control unit calibration. Cable for connection to the control unit of the Ariane K2RE electric minibike, the cable is necessary for setting the power of the minibike. With the cable and the appropriate program supplied separately, it will be possible to connect to the control unit and calibrate the minibike to your liking.
Reference: FON.XRACING
Brand: XRACING
Special Xracing sound-absorbing silencer universal for all minimoto silencers. Special composite with steel mesh, guarantees better performance by exploiting better gas output from the perforated barrel, guarantees a unique level of sound absorption. ✔️compatible with Dm ✔️compatible with Cs ✔️compatible with Iame ✔️compatible with Ghr ✔️compatible with...
Reference: 2020x2
Brand: STAMAS
Stamas clip-on handlebars for 25 mm forks, handlebar diameter 22 mm.
Reference: 112.173.00
Brand: GRC
Pair of aluminum minimoto levers complete with register
Reference: meteor36cs
Brand: Tecnominimoto
Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...
Reference: 001002SP088A
Brand: DM
Chrome fork caps diameter 25 for Dm minimoto, pack of 2. Dm code: 001002SP088A
Reference: SIL.001
Brand: XRACING
60mm tubular carbon for Xracing silencer. Replacement for XRacing minimoto silencer.
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems.
DM Code: 001002R01400
