Xmotorstore Payments
Minimoto DM front mechanical brake caliper support columns
Long column: 33 mm
Short column: 21 mm
Smooth side stud diameter: 7 mm
Stud thread diameter: 10 mm
Code: R017BO
Minimoto DM front mechanical brake caliper support columns
Long column: 33 mm
Short column: 21 mm
Smooth side stud diameter: 7 mm
Stud thread diameter: 10 mm
Code: R017BO
Reference: 001002R017E0
Brand: DM
Minimoto mechanical rear brake caliper Dm. DM Code: 001002R017E0
Reference: 001002R01900
Brand: DM
Carbon brake pads for DM mechanical brakes. Front and rear. DM Code: 001002R01900
Reference: BZM-011010
Brand: BZM
Bzm crankshaft keys (5dx 5sx). BZM minimoto crankshaft keys. The key kit consists of: 5 Bzm clutch keys. 5 Bzm flywheel keys.
Reference: 143.000.251
Brand: POLINI
Minimoto Polini 910 Rs hull with 4.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.251. Minimoto Polini 910 S hull 4.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 1015
Brand: STAMAS
Pair support platforms Stamas aluminium midi
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: 112.240.14
Brand: GRC
Lower motor pin Grc d.14 midi rrz-3
Reference: 143.130.001
Brand: POLINI
Reverso Polini water pump shaft. Original Polini spare part. Code: 143.130.001.
Reference: SCR.0294
Brand: CS Racing
Minimoto muffler springs Cs. Cs racing exhaust springs for minibikes, these springs are to be applied between bend and expansion, and based on the type of silencer they are also adaptable between expansion and silencer. Total spring length 72 mm. Unloaded spring length (L0) 68 mm. Spring length without eyelet (Lk) 40 mm. External diameter of the coils...
Reference: 011 DM - XSTE050
Brand: DM
Minimoto Dm adjustable steering damper Fg gubellini. The shock absorber for minibikes most used in competitions. The Gubellini steering damper for Dm minibikes has a stroke of 50 mm, with an ergal body.
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Reference: 143.160.014
Brand: POLINI
Complete clutch 2 masses for Polini Reverso mini-motorcycle engine. Polini code: 143.160.014
Reference: TCM2093
Brand: Tecnominimoto
Pulley to the hub for minimoto DM and GRC. Pulley for transmission to the minimoto water pump, compatible with Dm and Grc. The pulley is made of metal, in red color.
Reference: GHR 067.015
Brand: GHR
15mm Ghr minimoto reed valve pack. The aluminum Ghr reed valve pack is compatible with Iame, Cs, Ghr, Bzm, Polini (6.2). To be used for racing engines.
Reference: Deviaflussi-Cs
Brand: CS Racing
Iame CS flow diverter, available with the variants: oval / round diameter 15 or 21.
Reference: 143.002.004
Brand: POLINI
Polini air-cooled minibike engine 4.2 hp, 40cc 2t displacement. Polini code: 143.002.004. The Polini 4.2 hp engine can be installed on all Italian mini-bikes, such as Dm, Grc, Stamas.
Reference: 143.565.001
Brand: POLINI
Polini 910 minimoto swingarm chain guide shoe. Polini code: 143.565.001
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Minimoto DM front mechanical brake caliper support columns
Long column: 33 mm
Short column: 21 mm
Smooth side stud diameter: 7 mm
Stud thread diameter: 10 mm
Code: R017BO
