Xmotorstore Payments
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 001002R085A0
Brand: DM
Curved racing DM mini-bike radiator Top width 21 cm Bottom width 17 cm Thickness 5 cm
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 132
Brand: DM
Increased Dm minibike radiator, the oversized Dm radiator is dedicated to racing minibikes, it allows better engine cooling even in the most extreme conditions of use. Radiator weight Dm: 566 grams Pipe connections: 10 mm Attention: Artisan radiator handmade to order, delivery time 30 days.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 143.680.001
Brand: POLINI
Revision starter kit Polini minibike. Polini code: 143.680.001
Reference: 143.803.006
Brand: POLINI
Polini 911 minibike white rear tail. Polini code: 143.803.006
Reference: 143.010.011
Brand: POLINI
Cylinder with piston water transfers 3 d.36. Polini code: 143.010.011
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: GHR 001.001
Brand: GHR
GHR GP1 H2O 50cc 2-stroke complete engine. Includes exhaust, silencer, Dell’Orto PHBG 21 carburetor, venturi, and air filter. Racing setup.
Reference: 001002R017F0
Brand: DM
Aluminum rear mechanical brake caliper support kit for minimoto Dm. Code: 001002R017F0
Reference: TCM30
Brand: Tecnominimoto
Tcm red minibike starter carter. Ignition cover for minibike engine, in red ox aluminium, compatible with: Bzm starter carter. Cs starter carter. Polini starter carter. Tcm starter carter.
Reference: 001002A00800
Brand: DM
Spacer plus screw on clutch side Dm. The spacer is used to maintain the distance between the pedal and the pinion in the event of a fall, thus preventing the pinion from breaking.
Reference: 112.153.05
Brand: GRC
Sintered brake pad pair for PLK radial mechanical or hydraulic calipers. 2-hole mount with 22 mm spacing. Code 112.153.05.
Reference: 001002R003C0
Brand: DM
Hull spacer kit Dm 5 pieces. Dm code: 001002R003C0
Reference: 143.750.007
Brand: POLINI
Front brake disc for Polini minibike 122 mm, can be mounted on the right and left. We recommend the use of original Polini pads. Polini code: 143.750.007
Reference: 143.190.002
Brand: POLINI
Set of bearings with caps for Polini scooter steering. Polini code: 143.190.002 Polini scooter steering bearings, last pieces available.
Reference: 143.802.019
Brand: POLINI
Polini 910 mini biketank cover black color. Polini Code: 143.802.019
Reference: 112.145.74
Brand: GRC
Front wheel pin 10x160 for hub (L) L.94 Grc
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
