Xmotorstore Payments
Kit columns support brake caliper
Reference: 143.170.002
Brand: POLINI
Polini minimoto water pump. Polini code: 143.170.002 Polini water pump for minimoto, the Polini water pump for minimoto is universal for all minimotos with an external pump.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: TCM/BZM 50 H20
Brand: Tecnominimoto
Minibike engine gasket kit BZM, TCM 50cc H2o. Complete kit of gaskets for 50cc minimoto Bzm and Tecnomoto engines.
Reference: Tornado-M10
Brand: Tecnominimoto
Tornado Minibike Bell. Tornado model minibike bell, with M.10 thread, available in diameters: 79, 80, and 81 mm. Ductile iron bell. Can be mounted on all types of minibike crankcases. Adjustable from the outside without removing the crankcase. Can be used with all types of clutches. Highly performing with TCM clutches. Its shape allows for better air...
Reference: LAM.001
Brand: CS Racing
Fiberglass reed petals for CS minimoto reed valve. Compatible with all Italian minimoto brands. Available in 0.20 - 0.25 - 0.32 - 0.37 mm. Pair of CIV approved CS fibre slats: (select thickness 0.32 for junior A & B CIV & simoncelli single-cylinder engines).
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: 9006
Brand: STAMAS
Silentbolck kit with screws for Stamas oversized radiator
Reference: 001002R07300
Brand: DM
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reference: IME-03000
Brand: CS Racing
Selettra racing minimoto coil, Selettra 3500 racing coil model. This reel is suitable for minimoto and minicross. Compatibility: iame cs coil, Bzm coil, Ghr coil, Zocchi coil, Beast coil, Lem coil.
Reference: 001002R01400
Brand: DM
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems. DM Code: 001002R01400
Reference: 143.803.017
Brand: POLINI
Rear fairing Polini 910 s black. Polini code: 143.803.017 Rear fairing for Polini minimoto, model 910 S RS, in black color. Fairing in black plastic material.
Kit columns support brake caliper
