Xmotorstore Payments
Avviamento minimoto Cs racing Iame. Compatibile con motori Iame, Bzm, Polini, zocchi, ed altri. Ideale per iniziare il minimoto a mantenere un'ottima ventilazione del motore.
Avviamento minimoto Cs racing Iame. Compatibile con motori Iame, Bzm, Polini, zocchi, ed altri. Ideale per iniziare il minimoto a mantenere un'ottima ventilazione del motore.
Reference: GHR 049.001
Brand: GHR
Ghr starter cover in ergal. Compatible with Bzm, Iame, Cs, Ghr engines.
Reference: IME-02000-C
Brand: CS Racing
Ignition flywheel Cs 80mm. The cs ignition rotor is compatible with iame, cs, bzm, Polini engines.
Reference: DD.VF.MIN
Brand: XRACING
Clutch nut / minimoto flywheel, compatible with engine: Polini, Cs, Ghr, Bzm.
Reference: 143.002.002
Brand: POLINI
Polini air 6.2 junior minimoto engine. The air-cooled Polini 6.2 engine is suitable for children and Junior categories. The 6.2 hp engine is supplied with a 14.14 L Dellorto carburettor, including fuel pipe and throttle cable.
Reference: 044
Brand: DM
Minimoto swingarm Dm 2025 center distance 272 mm. The new Dm 2025 swingarm has been reinforced and improved, allowing a better ride and a longer life even in conditions of maximum stress. The mini bike will be more responsive and stable. Dm code: 044
Reference: Molle.rac.cs
Brand: CS Racing
Cs muffler exhaust fitting springs. Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold. Attention: pair of springs, specific for Cs minibike muffler. Total spring length 35 mm. Unloaded spring length (L0) 32 mm. Spring length without eyelet (Lk) 17 mm. External diameter of the coils (De)...
Reference: IMZ-50992
Brand: CS Racing
Cs 40cc engine gaskets, available: Cs flange 10 gaskets, Cs flange 12 gaskets, Cs flange 15 gaskets.
Reference: 112.383.15
Brand: GRC
Seeger couple for minimoto clutch crankcase bearing. IN seeger for minimoto carter are used to keep the bell bearing in the correct seat. 112.383.15
Reference: 001002R075B0
Brand: DM
Universal mini bike stand resistant and practical stand for minimoto support. DM Code: 001002R075B0
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 143.750.007
Brand: POLINI
Front brake disc for Polini minibike 122 mm, can be mounted on the right and left. We recommend the use of original Polini pads. Polini code: 143.750.007
Reference: 053
Brand: DM
Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.
Reference: 9006
Brand: STAMAS
Silentbolck kit with screws for Stamas oversized radiator
Reference: 001002SP086B
Brand: DM
37mm silver trim adjustment kit for DM Midi DM Code: 001002SP086B 37mm silver trim adjustment kit for DM Midi
Reference: 001002A02900
Brand: DM
Minimoto upper engine support pin Dm, 2 pieces.
Reference: 143.695.009
Brand: POLINI
Locking key for Polini 2-mass clutch group 143.695.009. Polini clutch locking key for minimoto. The Polini clutch locking key is compatible with all engines that have hole spacing: 74 mm.
Reference: 4012
Brand: STAMAS
Stamas factory rear mechanical brake caliper.
Reference: 6006
Brand: STAMAS
Raw monocoque Stamas sr r factory. The Stamas rear fairing is made of fiberglass and does not include the internal tank.
Avviamento minimoto Cs racing Iame. Compatibile con motori Iame, Bzm, Polini, zocchi, ed altri. Ideale per iniziare il minimoto a mantenere un'ottima ventilazione del motore.
