- On sale!
- Reduced price
- New
Xmotorstore Payments
Black Dm handlebars for 28 mm diameter fork stems. Dm handlebars for minibikes are made of aluminum.
Collar attachment hole distance: 38 mm.
Handlebar diameter Dm: 22 mm.
Attention: The color of the Dm semi-dumbbells may vary according to the production batch.
Black Dm handlebars for 28 mm diameter fork stems. Dm handlebars for minibikes are made of aluminum.
Collar attachment hole distance: 38 mm.
Handlebar diameter Dm: 22 mm.
Attention: The color of the Dm semi-dumbbells may vary according to the production batch.
Reference: 001002R03100
Brand: DM
Universal quick throttle control for minimoto, produced by Dm, compatible with: Stamas, Dm, Blata, Grc, Polini and others. Compatible with 21/22 mm handlebars. Knob length 115 mm. Total length of throttle control 145 mm. Code: 001002R03100.
Reference: 053
Brand: DM
Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.
Reference: 121
Brand: DM
Handlebar clamp Dm diameter 28 mm. The 28 mm fork clamp is universal, applicable to all mini bikes.
Reference: 120
Brand: DM
Dm handlebars complete with clamp diameter 28 mm
Reference: A25041C4240C7-0
Brand: Domino
Pair of Domino A250 Road Racing grips. Pair of two-component thermoplastic rubber knobs with soft smooth finish. Material: Two-component thermoplastic rubber Length: 120mm / 125mm End: Open Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 2 slots Flange diameter: 43 mm Handle diameter Knob mounted: 31 mm
Reference: 143.145.004
Brand: POLINI
Polini minimoto clutch bell diameter 80 mm for water pump pulley. Polini code: 143.145.004. Specific bell to be able to use the transmission pulley, to be connected to the water pump via oring.
Reference: 263.204.00
Brand: Blata
Blata minimoto rear disc brake. Rear disc brake for Blata minimoto, standard fixed version.
Reference: GHR 033.001
Brand: GHR
Plate pins for clutch Ghr 2 masses
Reference: pastiglie-stamas-mecc
Brand: STAMAS
Brake pads for Stamas mechanical caliper.
Reference: 143.750.009
Brand: POLINI
Polini minimoto brake pads, for Polini 910. Code: 143.750.009
Reference: 001002R017E0
Brand: DM
Minimoto mechanical rear brake caliper Dm. DM Code: 001002R017E0
Reference: 001002R017B0
Brand: DM
Minimoto DM front mechanical brake caliper support columns Long column: 33 mm Short column: 21 mm Smooth side stud diameter: 7 mm Stud thread diameter: 10 mm Code: R017BO
Reference: Bzm-101010
Brand: BZM
Minimoto bell Bzm d.80 m8 for h2o pulley. Clutch bell Bzm diameter 80 mm, for m8 pinion. Attention: Specific version for water pump pulley to the pinion.
Reference: 2020x2
Brand: STAMAS
Stamas clip-on handlebars for 25 mm forks, handlebar diameter 22 mm.
Reference: 090
Brand: DM
DM minimoto fairing quick releases, 2 pieces. Quick release kit for Dm minimoto fairings, the kit includes 2 plates, 2 quick screws, 2 rivets. This kit is compatible with Dm minimoto frames from 2016 onwards. Dm code: 090
Reference: 114
Brand: DM
DM rear fender for aluminum swingarm from 2012 Weight: 94g Dm Code: 114
Reference: 001002R01900
Brand: DM
Carbon brake pads for DM mechanical brakes. Front and rear. DM Code: 001002R01900
Reference: 143.000.029
Brand: POLINI
Minimoto Polini 910 Rs hull with 4.2 HP air motor, 5-inch wheels, white colour. Polini code: 143.000.029. Minimoto Polini 910 S hull 4.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 001002R01400
Brand: DM
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems. DM Code: 001002R01400
Reference: 143.761.001
Brand: POLINI
Complete Polini petrol tap. Code: 143.761.001
Black Dm handlebars for 28 mm diameter fork stems. Dm handlebars for minibikes are made of aluminum.
Collar attachment hole distance: 38 mm.
Handlebar diameter Dm: 22 mm.
Attention: The color of the Dm semi-dumbbells may vary according to the production batch.