- On sale!
- Reduced price
- New

Xmotorstore Payments
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 5013
Brand: STAMAS
Stamas rear hub pulley for water pump drive belt.
Reference: 143.355.005
Brand: GRC
Or pump transmission to the pinion. Code: 143.355.005
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 143.763.005
Brand: POLINI
Universal mini bike pedals, the mini bike footpegs are made of resistant and non-slip plastic material. The footpegs are compatible with Polini, Stamas, Grc, Dm, and many others. Easy assembly, compatible with all Italian minimoto footpeg supports.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: 001002R017E0
Brand: DM
Minimoto mechanical rear brake caliper Dm. DM Code: 001002R017E0
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 060
Brand: DM
Spacer Dm in stainless steel on the crown side for hub 116 mm.
Reference: 2013 A
Brand: STAMAS
Pair of Stamas factory midi fork tubes diameter 25 in aluminum.
Reference: 001002SP1310
Brand: DM
Floating trim variator for Dm 2024 swingarm. Dm Code: 001002SP1310
Reference: 285.0007
Brand: POLINI
Pair of oil seals for minimoto measuring 15x24x5 racing PTFE / FKM Polini, the most used minimoto oil seals on Cs, Polini, Iame, Bzm, Ghr, Beast, and others. Fluorocarbon oil seals for racing mini bikes, very high thermal resistance and smoothness, ideal for high performance shafts. Oil seal measures: external 24 mm internal 15 mm thickness 5 mm Polini...
Reference: GHR 037.002
Brand: GHR
Blue Ghr clutch springs 2.3 mm. Ghr code: 037.002 Pair of 2 GHR minimoto clutch springs, suitable for Junior engines.
Reference: F00 002 - 029
Brand: DM
Formula rear axial caliper support for Dm. Support for Formula rear brake on Dm minibike. Code: F00 002
Reference: 143.075.002
Brand: POLINI
Polini minimoto starter carter Ignition crankcase suitable for Polini engines with black Idm coil (2 irons) Polini code : 143.075.002
Reference: 143.145.004
Brand: POLINI
Polini minimoto clutch bell diameter 80 mm for water pump pulley. Polini code: 143.145.004. Specific bell to be able to use the transmission pulley, to be connected to the water pump via oring.
Reference: GHR 034.002
Brand: GHR
G-Radius black plate adjustment kit (wheel with movable pin and pusher)
Reference: dist-ruota-dm-red
Brand: XRACING
Pair of front wheel spacers Dm red. Xmotorstore presents its new product specifically for DM minimoto: minimoto wheel spacers entirely machined from solid and anodized in red, particular attention has been paid to the external chamfers of the spacers, which allow easy assembly in tight spaces and for better sliding of the bearings. Technical...
Reference: 112.486.25
Brand: GRC
Minimoto clutch bell disassembly assembly group. Compatible with all Italian minimoto engines.
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.