Xmotorstore Payments
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws.
DM Code: 001002A01000
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws.
DM Code: 001002A01000
Reference: 001002R003B0
Brand: DM
rubber kit for fairing Dm 5 pieces. Suitable for original fairings, they allow to reduce the vibrations on the fairing. DM Code: 001002R003B0
Reference: 090
Brand: DM
DM minimoto fairing quick releases, 2 pieces. Quick release kit for Dm minimoto fairings, the kit includes 2 plates, 2 quick screws, 2 rivets. This kit is compatible with Dm minimoto frames from 2016 onwards. Dm code: 090
Reference: 143.630.002
Brand: POLINI
Rear wheel pin for Polini 910 minimoto. Polini code: 143.630.002 Rear wheel pin complete with spacers and nut, for Polini 910 minimoto.
Reference: TCM70
Brand: Tecnominimoto
Cnc made Tcm crankcase in red color, for Bzm 690 crankcase for bells from 80 to 86 mm.
Reference: 143.160.011
Brand: POLINI
Polini minimoto clutch plate 143.160.011. Polini plate for Polini minimoto clutch with 2 masses. Original Polini minimoto clutch spare part.
Reference: 030
Brand: DM
Dm mini bike front fender supports, compatible with 28 mm and 25 mm forks, for plastic fender and carbon fender.
Reference: 143.010.015
Brand: POLINI
Polini cylinder with water piston d.36 3 reverse transfers. Polini code: 143.010.015
Reference: 143.075.007
Brand: POLINI
Pump cover and pinion steel. Polini Code: 143.075.007
Reference: 143.761.001
Brand: POLINI
Complete Polini petrol tap. Code: 143.761.001
Reference: 112.383.15
Brand: GRC
Seeger couple for minimoto clutch crankcase bearing. IN seeger for minimoto carter are used to keep the bell bearing in the correct seat. 112.383.15
Reference: 143.080.001
Brand: POLINI
Standard polini minimoto crankshaft. Shaft compatible with Polini 6.2 and 4.2 Polini engine. Polini Code: 143.080.001
Reference: 001002R017B0
Brand: DM
Minimoto DM front mechanical brake caliper support columns Long column: 33 mm Short column: 21 mm Smooth side stud diameter: 7 mm Stud thread diameter: 10 mm Code: R017BO
Reference: 045
Brand: DM
Gas wire and sheath for Phbg carburetor and quick throttle control.
Reference: 143.710.003
Brand: POLINI
Adjustable steering damper steel gp3. Polini code: 143.710.003
Reference: 001002SP095C
Brand: DM
Rear brake caliper support threaded pin for aluminum swingarm Dm. Threaded pin for swingarm Dm. Dm code: 001002SP095C
Reference: BZM-018004
Brand: BZM
Segment Bzm racing 40 mm 50 cc. Bzm minimoto piston ring diameter 40 mm, for 50 cc 2t engines. Segment NOT chromed.
Reference: 143.730.021+143.730.022
Brand: POLINI
Pair of 6.5 inch Polini minimoto rims for 910 and 911 5-spoke. Front rim and rear rim 6.5 inches ideal for modifying the Polini minibike going from 5 inches to 6.5 to mount the rims it is necessary to mount custom spacers on the sides of the bearings, not included in the kit, the rear rim is already included with a pulley for pump transmission water for...
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws.
DM Code: 001002A01000
