Xmotorstore Payments
Stamas rear hub pulley for water pump drive belt.
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 121
Brand: DM
Handlebar clamp Dm diameter 28 mm. The 28 mm fork clamp is universal, applicable to all mini bikes.
Reference: Bzm-105018020
Brand: BZM
Blata minimoto engine gaskets. Gasket kit for Blata, compatible with Ø36-37-40. Kit compatible with: Blata 40cc 2t engine gaskets Blata 50cc 2t engine gaskets The seals are compatible with replica and original Blata.
Reference: 280.0007
Brand: POLINI
Polini water pump overhaul kit, Polini code: 280.0007
Reference: 143.730.014
Brand: POLINI
Air valve for front racing rim for Polini minimoto. Polini code: 143.730.014
Reference: 115.010.022
Brand: BZM
Gasket kit for Bzm 40cc 2t air engine. Gasket kit for Bzm minimoto engine, diameter 36 mm, 40cc, air-cooled. Bzm gaskets compatible with Bzm 420 and 620 engine crankcases. Diameter: 36 mm. Displacement: 40cc. Crankcase: 420 and 620. Cooling: AIR.
Reference: GHR 001.002
Brand: GHR
Complete Ghr minimoto engine gp1 h2o 50 factory racing. The engine is supplied complete with muffler, silencer.
Reference: 143.145.004
Brand: POLINI
Polini minimoto clutch bell diameter 80 mm for water pump pulley. Polini code: 143.145.004. Specific bell to be able to use the transmission pulley, to be connected to the water pump via oring.
Reference: 520056
Brand: T4TUNE
Professional pressure gauge for tire pressure measurement up to 1 bar. Pressure gauge with 0-1 bar measurement range ideal for establishing the precise pressure of the minimoto scooter tires. Recommended for measuring minibike track tyres, it allows the right measurement in bar for optimal driving.
Reference: 143.270.003
Brand: POLINI
Polini 4.2 hp minibike reed valve d.14 (4 petals) Code: 143.270.003 Conversion kit 4.2 hp into 6.2 hp with lamellar aspiration.
Reference: 143.465.001
Brand: POLINI
Air filter for Polini minimoto, the filter is compatible with the SHA 14 carburettor. Polini code: 143.465.001
Reference: 143.075.002
Brand: POLINI
Polini minimoto starter carter Ignition crankcase suitable for Polini engines with black Idm coil (2 irons) Polini code : 143.075.002
Reference: 143.600.003
Brand: POLINI
Polini reverso minibike coil. Original coil for Polini reverse engine. Code: 143.600.003
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 124
Brand: DM
Fork plates Dm 25 mm for Bzm fg shock absorber (2 pieces). Dm Code: 124
Stamas rear hub pulley for water pump drive belt.
