Xmotorstore Payments
Minimoto mechanical rear brake caliper Dm.
DM Code: 001002R017E0
Minimoto mechanical rear brake caliper Dm.
DM Code: 001002R017E0
Reference: 001002R04600
Brand: DM
Soft rear brake line with sheath for Dm minimoto. DM Code: 001002R04600
Reference: 001002R02000
Brand: DM
Aluminum brake levers for minimoto, the levers are adjustable in excursion, allowing you to move the lever closer or further away from your hand. The brake levers are universal, compatible with all 22 mm half handlebars.
Reference: TCM K2012
Brand: Tecnominimoto
TCM masses diameter 86mm. The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells. Currently the best on the market for duration, yield, and gluing. Recommended 2.6 mm springs...
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: 143.801.043
Brand: POLINI
Polini 910 minimoto fairing glass. The universal Polini 910 minimoto fairing. Polini Code: 143.801.043
Reference: 143.355.005
Brand: GRC
Or pump transmission to the pinion. Code: 143.355.005
Reference: TCM120
Brand: Tecnominimoto
TCM junior minimoto exhaust for 10 and 12 mm flanged engines. Tecnomoto junior minimoto muffler for flanged 10 and 12 mm with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 090
Brand: DM
DM minimoto fairing quick releases, 2 pieces. Quick release kit for Dm minimoto fairings, the kit includes 2 plates, 2 quick screws, 2 rivets. This kit is compatible with Dm minimoto frames from 2016 onwards. Dm code: 090
Reference: 6011
Brand: STAMAS
Pair of threaded pull bushings for hull
Reference: 143.305.010
Brand: POLINI
Set of screws and nuts for Polini minimoto frame and fairings. Polini code: 143.305.010 The Polini minimoto screw kit includes: Polini minimoto fairing screws 910. Polini minimoto frame screws 910. Set of screws for Polini minimoto model 910, generic. Attention generic kit for 910, 910 S, 910 RS, may not contain some variants.
Reference: Pistone Ghr 50cc
Brand: GHR
Ghr piston for 50cc engines. Original Ghr piston for 50cc 2t racing engine, the piston is available in the following sizes: Ghr A piston 39.95. Ghr B piston 39.96. Ghr C piston 39.97. Ghr D piston 39.98. Select the desired size.
Reference: 001002SP089A
Brand: DM
Minimoto fork plates pin Dm, for midi version. Dm code: 001002SP089A
Reference: FM10126-20
Brand: Formula
Complete left Formula brake pump. Formula Code: FM10126-20
Reference: 1001 R
Brand: STAMAS
Central frame Stamas SR race factory 2020, the 100% made in Italy competition frame. Suitable for Stamas Midi and Mini minibikes. Total weight: 2,908 kg
Reference: 001002R01400
Brand: DM
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems. DM Code: 001002R01400
Reference: 001002R02600
Brand: DM
Pair of rear wheel bearings with 130 DM spacer. This kit is compatible with the rear hub of the Dm minimoto, with mechanical brake and old type iron/steel swingarm. Spacer size 117.5 mm.
Reference: 143.290.112
Brand: POLINI
Sprocket 12 Teeth Reverse Polini. Polini Code: 143.290.112
Minimoto mechanical rear brake caliper Dm.
DM Code: 001002R017E0
