- On sale!
- Reduced price
- New
Xmotorstore Payments
Workshop mini bike stand, specific model for Dm. The Dm work stand is necessary to be able to access the assembly and disassembly of each part, the stand is rotatable.
DM Code: 001002R07500
Workshop mini bike stand, specific model for Dm. The Dm work stand is necessary to be able to access the assembly and disassembly of each part, the stand is rotatable.
DM Code: 001002R07500
Reference: 112.486.04
Brand: GRC
Clutch locking key for minimoto 2 and 3 masses, Quick coupling. Quick, simple and effective clutch stop wrench to work on the clutch locking it to the crankcase, compatible with Polini, Iame, Cs, Ghr. Code: 112.486.04
Reference: 001002R075B0
Brand: DM
Universal mini bike stand resistant and practical stand for minimoto support. DM Code: 001002R075B0
Reference: 001002R075C0
Brand: DM
Storage shelf for workshop stand objects holder workshop stand dm. DM Code: 001002R075C0
Reference: 112.486.15
Brand: XRACING
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 001002R026A0
Brand: DM
Pair of rear wheel bearings and spacer 120 DM. DM Code: 001002R026A0
Reference: TCM139
Brand: Tecnominimoto
Minibike crankshaft Tcm 39.9 gold. Factory crankshaft 39.9 conrod CNC for competition pocket bikes.
Reference: 1015
Brand: STAMAS
Pair support platforms Stamas aluminium midi
Reference: TCM012
Brand: Tecnominimoto
TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.
Reference: 112.156.13
Brand: GRC
Special screws with Grc washer 145 floating front disc (6 pcs). Grc Code: 112.156.13
Reference: 111A
Brand: DM
Dm minimoto swingarm pads 2 pieces. New Dm pads for aluminum swingarm. The pads must be mounted exclusively with the 2025 chain tie rods, product code 111. This 2025 update of the Dm minimoto, improves the protection of the minimoto, without altering its performance and ease of adjustment.
Reference: tcmjunior1
Brand: Tecnominimoto
TCM junior minimoto exhaust for flanged. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 112.152.00
Brand: GRC
Lever return spring to left caliper Grc (MECHANICAL) 112.152.00
Reference: 143.145.004
Brand: POLINI
Polini minimoto clutch bell diameter 80 mm for water pump pulley. Polini code: 143.145.004. Specific bell to be able to use the transmission pulley, to be connected to the water pump via oring.
Reference: 5006/28
Brand: STAMAS
Factory front hub for 28 mm fork legs, including bearings and internal spacer.
Reference: tcm652
Brand: Tecnominimoto
Carter Bell Blata. Bell housing machined from solid TCM for 3-hole Blata.
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 143.360.001
Brand: POLINI
Fixing clamp steering shock absorber 143.360.001
Reference: 8006
Brand: STAMAS
Pair of bushings for motor fixing on midi Stamas frame
Workshop mini bike stand, specific model for Dm. The Dm work stand is necessary to be able to access the assembly and disassembly of each part, the stand is rotatable.
DM Code: 001002R07500