Minimoto soft gas thread DM 90cm

Reference: 143.555.001

Brand: POLINI

Polini flywheel minibike 90 mm 143.555.001

Polini minibike flywheel. The Polini flywheel dedicated to minibikes, compatible with selector coil and idm. Weight: 345 gr Polini Code: 143.555.001

Reference: 143.802.024

Brand: POLINI

Steel petrol tank Gp5 Polini 143.802.024

Steel petrol tank Gp5 Polini. Polini code: 143.802.024 Polini GP5 and GP6 minimoto tank, complete tank with petrol tap.

Reference: 112.104.00

Brand: GRC

Bearing kit plus spacer for hub Grc (90 94 110 114)

Bearing kit plus spacer for hub Grc  Select the desired measure between: 90/94/110/114. L.90 front (for mechanical brake) L.94 front (for hydraulic-mechanical brake) L.111 rear (for mechanical brake) L.114 rear (for hydraulic brake)

Reference: Supp-DM-formula-assiale-ant

Brand: Tecnominimoto

Formula axial front calliper support for Dm

Formula axial front calliper support for Dm. Support for mounting Formula hydraulic front caliper on mini bikes Dm, for 25 and 28 mm stems.

Reference: 10001

Brand: DM

Minibike gas tank universal

Minimoto petrol tank complete with cap, universal tank for Italian minibikes. Fuel pipe connection: 6mm Length: 18 cm Width: 15 cm Height (with cap): 13 cm Weight: 185 g

Reference: 143.730.021+143.730.022

Brand: POLINI

Pair of Polini 5-spoke 6.5 "wheels

Pair of 6.5 inch Polini minimoto rims for 910 and 911 5-spoke. Front rim and rear rim 6.5 inches ideal for modifying the Polini minibike going from 5 inches to 6.5 to mount the rims it is necessary to mount custom spacers on the sides of the bearings, not included in the kit, the rear rim is already included with a pulley for pump transmission water for...

Reference: 129

Brand: DM

Front brake disc Grimeca for Dm

New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm

Reference: 001002R002D0

Brand: DM

Rear wheel axle with DM nut up to 2007

Rear wheel axle with DM nut up to 2007 DM Code: 001002R002D0 Rear wheel axle with DM nut up to 2007

Reference: Xracing-chiave-frizione

Brand: XRACING

Minibike clutch adjustment wrench

Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.

Reference: 2021 X 2

Brand: STAMAS

Neckband Stamas cnc d.25 mm

Stamas clip-on handlebar clamps cnc separable for 58 mm diameter forks with screws, 2 pieces.

Reference: BZM-022025

Brand: BZM

Dome head Bzm d.40 50cc

Reference: 2006

Brand: STAMAS

Pair of 24 mm Stamas standard half handlebars

Pair of 24 mm Stamas standard half handlebars

Reference: 2016 D28

Brand: STAMAS

Cnc support for hydraulic front brake caliper factory Stamas

Cnc support for Formula hydraulic front brake caliper for Stamas with 28 mm diameter forks.

Reference: 088

Brand: DM

Minimbike plastic tank cap

Plastic minibike tank cap, compatible with: Dm, Stamas, Blata. The minibike cap is knurled, to allow an optimal grip when opening and closing.

Reference: TCM163

Brand: Tecnominimoto

TCM minimoto muffler for 50 cc engines

TCM minimoto muffler for 50 cc engines. Tecnomoto minimoto muffler with non-decomposable manifold. Complete exhaust for minimoto with 50cc 2t water-cooled engine. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.

Reference: 143.015.017

Brand: POLINI

Minibike head Polini h2o d.40 long thread 143.015.017

Polini h2o minibike head d.40 long thread. Polini Code: 143.015.017