CS racing clutch plate CIV

Reference: GHR 069.001

Brand: GHR

Kit gaskets reed valve crankcase crankcase/pack

Kit gaskets reed valve crankcase crankcase/pack

Reference: Estrattore-carter-motore-mini

Brand: XRACING

Minimoto engine crankcase extractor

Minibike crankcase puller. New in the minibike tool segment, a new universal minibike crankcase puller. The minibike crankcase puller is compatible with CS Racing engines and others, and is ideal for opening minibike engines without damaging the mounting holes. Puller dimensions: Outer hole spacing: 84 mm. Outer to center spacing: 58.5 mm.

Reference: IMH-04000-40-C

Brand: CS Racing

Cs muffler for h2o engine (40cc or 50cc)

Cs muffler for h2o engine (40cc or 50cc).

Reference: 143.120.001

Brand: POLINI

Reverse engine primary transmission shaft 143.120.001

Polini primary transmission shaft for minibike reverse engine. Polini code: 143.120.001

Reference: 143.705.008

Brand: POLINI

jaws for minimoto clutch Polini 143.705.008

Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...

Reference: GHR 021.002

Brand: GHR

Pair of Ghr engine crankcase spring pins

Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.

Reference: PISTONE IAME 40CC

Brand: CS Racing

Cs piston 40cc

Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm

Reference: tcmjunior1

Brand: Tecnominimoto

TCM minimoto exhaust for junior flanged engine

TCM junior minimoto exhaust for flanged. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.

Reference: Rac-sens-temp-mini

Brand: XRACING

Minimoto water temperature sensor connection in red ergal

Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...

Reference: FRZ.LEM

Brand: Lem motor

Universal chinese minibike clutch

Clutch for Chinese minimoto, universal clutch for minimoto. The centrifugal clutch 3 high-strength masses for minimoto china is compatible with all Chinese models. Chinese clutch sizes: Outer diameter: 75mm Total thickness: 24mm Central conical hole: from 14 to 12 mm

Reference: 143.340.011

Brand: POLINI

Antivibration support and spacers for h2o head 143.340.011

Reference: 112.383.15

Brand: GRC

Couple seeger for bearing cart clutch

Seeger couple for minimoto clutch crankcase bearing. IN seeger for minimoto carter are used to keep the bell bearing in the correct seat. 112.383.15

Reference: 5005

Brand: STAMAS

Front hub Stamas standard

Front hub Stamas standard

Reference: FM40024-20

Brand: Formula

Collar plus screws Formula brake

Reinforced collar plus Formula brake screws Code: FM40024-20

Reference: ZOC.800,0235

Brand: Zocchi

Chinese Minimoto Engine Gaskets M1 Zocchi ZOC.800,0235

Gaskets for Chinese M1 minibike engine Zocchi. Zocchi code: ZOC.800,0235 Gasket kit for the overhaul of the Chinese M1 minibike engine, for versions with air-cooled cylinder.

Reference: 112.240.10

Brand: GRC

Grc lower engine pin, diameter 15mm 112.240.10

Grc lower engine pin, diameter 15mm 112.240.10 Grc code: 112.240.10 Grc lower engine pin, diameter 15mm for 2010 midi RRZ