Xmotorstore Payments
Pair of rear wheel bearings and spacer 120 DM.
DM Code: 001002R026A0
Pair of rear wheel bearings and spacer 120 DM.
DM Code: 001002R026A0
Reference: 001002R02500
Brand: DM
Pair of front wheel bearings with spacer for DM minimoto. DM Code: 001002R02500
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: IMI-00400ER
Brand: CS Racing
Avviamento minimoto Cs racing Iame. Compatibile con motori Iame, Bzm, Polini, zocchi, ed altri. Ideale per iniziare il minimoto a mantenere un'ottima ventilazione del motore.
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: 112.159.11
Brand: GRC
Rear brake caliper mechanical support for short hub l.111 Grc
Reference: 111A
Brand: DM
Dm minimoto swingarm pads 2 pieces. New Dm pads for aluminum swingarm. The pads must be mounted exclusively with the 2025 chain tie rods, product code 111. This 2025 update of the Dm minimoto, improves the protection of the minimoto, without altering its performance and ease of adjustment.
Reference: 143.765.010
Brand: POLINI
Complete front AJP brake system for Polini GP5 minimoto. Original Polini spare – code 143.765.010.
Reference: GHR 501.001
Brand: GHR
Complete 40cc air Ghr engine ready to be installed on the minimoto. Ghr minimoto engine complete with muffler, silencer, 15mm carburetor, venturi and filter. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: tcm201835
Brand: Tecnominimoto
DM red front hub, universal for new and old model rims.
Reference: 9003
Brand: STAMAS
Antivibration grommets with spacers and screws for Stamas standard radiator
Reference: XR.CMP.001
Brand: XRACING
New XRACING minimoto bell with quick fixing bushing. Entirely made in Italy, machined from solid cast iron. Available in diameters: 78mm 79mm 80mm. This bell is compatible with M10 pinion. The new unique design ensures better cooling of the clutch assembly. The low weight ensures less traction effort, weight: 196 g
Reference: KT0.0031
Brand: CS Racing
Cs clutch plate pins. Cs racing minimoto clutch plate pins. Thread: M8. Thread height: 5 mm.
Reference: 143.600.001
Brand: POLINI
High voltage Polini minimoto coil, suitable for 4.2 and 6.2 Polini engines. Polini Code: 143.600.001
Reference: GHR 020.001
Brand: GHR
Pair of oil seals for minimoto GHR engines. Pair of oil seals for minimoto high smoothness engines GHR, for minimoto engines. The minimoto GHR oil seals are compatible with BZM, CS, IAME, POLINI engines and others. Oil seal measurements: 15x24x5 mm.
Reference: GHR 501.003
Brand: GHR
40cc air Ghr engine (without carburettor, filter and muffler). 40cc air Ghr engine, the engine does not include the carburetor and exhaust. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes. GHR minimoto engine weight: 5180 grams
Pair of rear wheel bearings and spacer 120 DM.
DM Code: 001002R026A0
