- New

Xmotorstore Payments
Kit gaskets reed valve crankcase crankcase/pack
Reference: 143.270.013
Brand: POLINI
21 mm diameter rubber intake manifold for minimoto. The steel manifold is suitable for all minimoto with Italian engine, such as iame, cs, ghr, Polini, bzm, zocchi and others. Manifold compatible with PHBG 15 18 19 21 carburetor. Collector measures: Holes for fixing: 5.5 mm Distance between holes: 34x43 mm Carburetor inlet hole: 21-23 mm Code: 143.270.013
Reference: 2508
Brand: DELLORTO
Dellorto carburetor phbg 15 bs Engine mount: 25 Filter attack: 32 Air: DIRECT Diffuser: 15 Gas valve: 40 Spill: 9595.23 W23 Powder: 266 AN Maximum jet: 90 M5 Minimum jet: 50 Starting jet: 60 Float: 4g Dellorto code: 02508
Reference: 02671
Brand: DELLORTO
Dellorto phbg 21 bs carburetor with manual choke knob. Motor mount: 25 Filter connection: M32x1.25 Gas valve: 50 Conical needle: 16 Pulverizer: 262 AU Maximum jet: 96 Minimum jet: 48 Starter jet: 60 Float: 4 gr Dellorto code 02671
Reference: GHR 067.015
Brand: GHR
15mm Ghr minimoto reed valve pack. The aluminum Ghr reed valve pack is compatible with Iame, Cs, Ghr, Bzm, Polini (6.2). To be used for racing engines.
Reference: 143.340.035
Brand: POLINI
Original Polini engine support brackets for GP3 air-cooled minimoto. Code 143.340.035. Strong and reliable racing part.
Reference: 143.270.011
Brand: POLINI
Minimoto rubber intake manifold, straight steel model. Polini Code: 143.270.011
Reference: IMA-10551
Brand: CS Racing
Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.
Reference: 34 9806
Brand: Malossi
Malossi piston d.36 2t for mini bikes. All Malossi cylinders in cast iron and aluminum are divided into selection classes. They range from selection 0 (smallest piston) to selection D (largest piston). Each selection step is equivalent to an increase of 0.01 mm. When placing your order, carefully check your selection as shown in the example below:...
Reference: 143.080.001
Brand: POLINI
Standard polini minimoto crankshaft. Shaft compatible with Polini 6.2 and 4.2 Polini engine. Polini Code: 143.080.001
Reference: 112.353.16
Brand: GRC
Or for minimoto fuel tank cap Grc 112.353.16
Reference: 001002R02600
Brand: DM
Pair of rear wheel bearings with 130 DM spacer. This kit is compatible with the rear hub of the Dm minimoto, with mechanical brake and old type iron/steel swingarm. Spacer size 117.5 mm.
Reference: 143.075.002
Brand: POLINI
Polini minimoto starter carter Ignition crankcase suitable for Polini engines with black Idm coil (2 irons) Polini code : 143.075.002
Reference: 001001032000
Brand: DM
Complete mini bike chassis DM, Midi version. The bike has the same technical characteristics as the complete versions without the following details: Complete engine with carburetor. Muffler with silencer. The bike has the following options: Black ø 28 mm aluminum forks Adjustable aluminum rear swingarm (new reinforced version) Built in chromium molybdenum...
Reference: 105018000
Brand: BZM
BZM Ø36 (40cc) cylinder gasket kit for Polini Reverse 4.2 and 6.2 HP minimoto engines – Also compatible with replicas.
Reference: tcm239
Brand: Tecnominimoto
Minimoto engine support Tcm Bzm Or. Minimoto engine support, with attachment to the engine crankcase, the support to the crankcase allows for better engine stability and a more resistant fixing. The support connects the engine crankcase to the upper engine fixing pin. Compatible for: Bzm engine support. Tcm engine support. Or. engine support
Reference: 143.395.003
Brand: POLINI
Polini throttle cable 143.395.003 . Polini code: 143.395.003 Polini throttle cable for throttle control and SHA 14 carburetor. The throttle cable with sheath is compatible with Polini minimoto and other minimotos that mount SHA carburetor.
Reference: 143.340.049
Brand: POLINI
Rear brake support bracket right Polini GP5. Polini code: 143.340.049
Reference: 6006
Brand: STAMAS
Raw monocoque Stamas sr r factory. The Stamas rear fairing is made of fiberglass and does not include the internal tank.
Reference: clt.min.cin
Brand: XRACING
Chinese minimoto manifold for Sha carburetor. The aluminum manifold for Chinese minimoto is compatible with all Chinese air-cooled minimoto engines, allows the assembly of the SHA 16 Dellorto carburetor. The manifold is interchangeable with the original plastic.
Reference: Avv-mini-cina-metallo
Chinese minimoto starter gear. Universal Chinese mini motorcycle starter metal gear, the metal gear allows you to avoid damage to the starter during starting, and extends its life.
Kit gaskets reed valve crankcase crankcase/pack