- On sale!
- New
Xmotorstore Payments
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition.
Grc Code: 112.480.00
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition.
Grc Code: 112.480.00
Reference: 112.486.04
Brand: GRC
Clutch locking key for minimoto 2 and 3 masses, Quick coupling. Quick, simple and effective clutch stop wrench to work on the clutch locking it to the crankcase, compatible with Polini, Iame, Cs, Ghr. Code: 112.486.04
Reference: 112.486.15
Brand: XRACING
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 143.075.002
Brand: POLINI
Polini minimoto starter carter Ignition crankcase suitable for Polini engines with black Idm coil (2 irons) Polini code : 143.075.002
Reference: 143.565.001
Brand: POLINI
Polini 910 minimoto swingarm chain guide shoe. Polini code: 143.565.001
Reference: 102B
Brand: DM
Dm Junior 2025 minimoto set-up variators New Dm set-up variators for Junior riders. This 2025 update of the Dm minimoto improves the handling of the chassis thanks to the specific set-up position for Junior riders.
Reference: 143.340.038
Brand: POLINI
Polini 910 S minimoto front fairing bracket. Code: 143.340.038. New reinforced version for greater resistance and sealing of the front fairing.
Reference: NSK 6202 C4
Brand: XRACING
Pair of bearings minimoto engine Racing NSK C4. The high-slip mini-bike bearings, suitable for competition engines. NSK c4 motor bearings guarantee reliability and very high performance. Recommended application: Cs racing bearings, Iame bearings, Ghr bearings, Polini bearings, Bzm bearings, Tcm bearings, Beast bearings.
Reference: 143.145.005
Brand: POLINI
Clutch bell reverse engine minimoto Polini 143.145.005
Reference: LAM.001
Brand: CS Racing
Fiberglass reed petals for CS minimoto reed valve. Compatible with all Italian minimoto brands. Available in 0.20 - 0.25 - 0.32 - 0.37 mm. Pair of CIV approved CS fibre slats: (select thickness 0.32 for junior A & B CIV & simoncelli single-cylinder engines).
Reference: 143.803.021
Brand: POLINI
Rear tail 910 white 143.803.021
Reference: FM10141-10
Brand: Formula
Universal front or rear radial brake caliper Formula for minimoto and minicross. Formula Code: FM10141-10 Attention: The color of the caliper may vary depending on the production batch.
Reference: BZM-018004
Brand: BZM
Segment Bzm racing 40 mm 50 cc. Bzm minimoto piston ring diameter 40 mm, for 50 cc 2t engines. Segment NOT chromed.
Reference: 54214200
Brand: Tecnominimoto
Minibike crankshaft Tcm stroke 39.2 for engines: Bzm, Ghr, Quattrini, Cs, Medos, Polini, Zocchi.
Reference: 143.070.002
Brand: POLINI
Pair of Polini 6.2 hp minibike engine casings. Polini code: 143.070.002
Reference: 001002SP095C
Brand: DM
Rear brake caliper support threaded pin for aluminum swingarm Dm. Threaded pin for swingarm Dm. Dm code: 001002SP095C
Reference: 9003
Brand: STAMAS
Antivibration grommets with spacers and screws for Stamas standard radiator
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition.
Grc Code: 112.480.00