Xmotorstore Payments
Soft rear brake line with sheath for Dm minimoto.
DM Code: 001002R04600
Soft rear brake line with sheath for Dm minimoto.
DM Code: 001002R04600
Reference: 001002R01900
Brand: DM
Carbon brake pads for DM mechanical brakes. Front and rear. DM Code: 001002R01900
Reference: 112.010.75
Brand: GRC
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
Reference: GHR 501.001
Brand: GHR
Complete 40cc air Ghr engine ready to be installed on the minimoto. Ghr minimoto engine complete with muffler, silencer, 15mm carburetor, venturi and filter. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Reference: 132
Brand: DM
Increased Dm minibike radiator, the oversized Dm radiator is dedicated to racing minibikes, it allows better engine cooling even in the most extreme conditions of use. Radiator weight Dm: 566 grams Pipe connections: 10 mm Attention: Artisan radiator handmade to order, delivery time 30 days.
Reference: M099341-V90
Brand: PMT TYRES
90 ° tubeless valve for minimoto, scooter, and other rims.
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: IMC-40100
Brand: CS Racing
Coupling axis 14/5 x 32.3 connecting rod Cs
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: Supp-DM-formula-assiale-ant
Brand: Tecnominimoto
Formula axial front calliper support for Dm. Support for mounting Formula hydraulic front caliper on mini bikes Dm, for 25 and 28 mm stems.
Reference: 143.695.009
Brand: POLINI
Locking key for Polini 2-mass clutch group 143.695.009. Polini clutch locking key for minimoto. The Polini clutch locking key is compatible with all engines that have hole spacing: 74 mm.
Reference: 111A
Brand: DM
Dm minimoto swingarm pads 2 pieces. New Dm pads for aluminum swingarm. The pads must be mounted exclusively with the 2025 chain tie rods, product code 111. This 2025 update of the Dm minimoto, improves the protection of the minimoto, without altering its performance and ease of adjustment.
Reference: 001002R02000
Brand: DM
Aluminum brake levers for minimoto, the levers are adjustable in excursion, allowing you to move the lever closer or further away from your hand. The brake levers are universal, compatible with all 22 mm half handlebars.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 8006
Brand: STAMAS
Pair of bushings for motor fixing on midi Stamas frame
Soft rear brake line with sheath for Dm minimoto.
DM Code: 001002R04600
