Xmotorstore Payments
Side brackets radiator support Stamas race
Reference: 9004
Brand: STAMAS
Stamas racing oversized mini-bike radiator. The oversized radiator allows the correct temperature of the coolant to be maintained even in racing conditions.
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 143.802.004
Brand: POLINI
Complete petrol tank Polini 910 black minibike. Code: 143.802.004. Polini 910 tank complete with petrol tap and cap compatible with all Polini 910 mini bikes.
Reference: GHR 508.010
Brand: GHR
GHR exhaust connector for 40cc air-cooled flanged engines. Outer diameter 28 mm, 3 mounting holes (Ø 6 mm). Inner diameter options: 10 / 12 / 14 / 15 mm.
Reference: Bzm-003000
Brand: BZM
Clutch weights kit 2 masses Bzm. Kit of weights of 2 grams M8 for minimoto clutch, the weights for minimoto weights increase the thrust when opening the clutch.
Reference: 001002A00300
Brand: DM
Minimoto Dm steering bearings plus spacer and midi bushings.
Reference: 7005
Brand: STAMAS
Pair of bushes for Stamas minimoto steering head bearing
Reference: FM10126-20
Brand: Formula
Complete left Formula brake pump. Formula Code: FM10126-20
Reference: 001002R02600
Brand: DM
Pair of rear wheel bearings with 130 DM spacer. This kit is compatible with the rear hub of the Dm minimoto, with mechanical brake and old type iron/steel swingarm. Spacer size 117.5 mm.
Reference: KT0.0031
Brand: CS Racing
Cs clutch plate pins. Cs racing minimoto clutch plate pins. Thread: M8. Thread height: 5 mm.
Reference: IMB-20200
Brand: CS Racing
Crankcase shims for minimoto engines – 25x35 mm, thickness 0.10 mm. Sold in pairs. Compatible with Cs, Iame, Polini, Bzm, Ghr, Tcm and more.
Reference: 143.305.028
Brand: POLINI
Screw with spring fixing Polini GP4 reverse rope roller. Replacement kit for Polini Gp4 minimoto starter with h2o reverse engine. Polini Code: 143.305.028
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: GHR 066.001 - 143.270.016
Brand: GHR
Rubber intake manifold Ghr diameter 21 mm. Specific manifold for minibikes with Ghr engine and phbg carburettor.
Reference: IMH-02051
Brand: CS Racing
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange. Cs flange measurements: Center distance of cylinder attachment holes 47 mm Screw connection hole 6.5 mm Manifold connection 28 mm Base plate thickness 4 mm...
Reference: Prf post DM carbo
Brand: DM
Carbon rear fender for DM with aluminum swingarm from 2012 onwards. The lightest DM fender, only 35 grams. Compatible with original attachments, no changes are required.
Reference: 143.550.001
Brand: POLINI
Water pump gears reverse engine Polini 143.550.001
Reference: RP1000 RPM
Brand: PZ Racing
Digital tachometer and hour meter rpm rp1000 micro series Pzracing. Its very small size, internal batteries and inductive detection of engine revolutions make the tachometer usable on any type of vehicle, from mini-bikes to maxi-engined engines. In addition to displaying engine revolutions in real time, RPM RP1000 stores the number of engine operating...
Side brackets radiator support Stamas race
