Couple bushes for bearing Stamas

Reference: 001002A00800

Brand: DM

Spacer plus screw on the clutch side Dm

Spacer plus screw on clutch side Dm. The spacer is used to maintain the distance between the pedal and the pinion in the event of a fall, thus preventing the pinion from breaking.

Reference: 9005 L

Brand: STAMAS

Brackets side radiator race Stamas

Side brackets radiator support Stamas race

Reference: GHR 508.010

Brand: GHR

GHR Exhaust Connector for Flanged 40cc Air-Cooled Engines Ø28 (10-12-14-15 mm)

GHR exhaust connector for 40cc air-cooled flanged engines. Outer diameter 28 mm, 3 mounting holes (Ø 6 mm). Inner diameter options: 10 / 12 / 14 / 15 mm.

Reference: 143.465.004

Brand: POLINI

Air filter box 911 Polini 143.465.004

Polini 911 air filter box. Polini air filter box for minibike model 911, improves engine efficiency with an innovative design and optimized performance. Polini code: 143.465.004 Carburetor inlet: 58 mm.

Reference: 2036 8 18NC

Brand: PBR

Minimoto sprocket M10 Z8

Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.

Reference: 143.020.006 A B C D

Brand: POLINI

Polini piston d.40 for 50cc with segment 143.020.006

Polini piston diameter 40 flat head for 50cc with segment, the piston is included with a pin. Polini Code: 143.020.006

Reference: 332.0012

Brand: POLINI

Iron strip for silencer d.60 mm

Universal silencer support clamp diameter 60 mm with internal rubber ring. Ideal for supporting the silencer of minimoto, scooter, motorbike, and other vehicles. Material: Iron and Rubber Code: 332.0012

Reference: GHR 007.002

Brand: GHR

GHR exhaust side O-ring gasket

GHR exhaust side O-ring gasket. O-ring kit for Ghr exhaust, and flange.

Reference: BZM-022025

Brand: BZM

Dome head Bzm d.40 50cc

Reference: Allu-frame-dm

Brand: DM

DM full aluminum minimoto frame kit

DM full aluminum minimoto frame kit. DM aluminum frame, original DM. DM minimoto frame, completely in aluminum, very high quality product, compatible with MIDI and MINI versions. Compatible with air and water versions. Offered on the Factory Racing DM racing versions. The total weight is only: 1430 grams. VERY RARE AND UNFINDABLE, LAST PIECE AVAILABLE.

Reference: TCM167

Brand: Tecnominimoto

TCM junior minimoto exhaust for 15mm flanged engines

TCM junior minimoto exhaust for 15mm flanged engines. Tecnomoto junior minimoto exhaust for 15 mm flanges with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 15 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.

Reference: GHR 033.001

Brand: GHR

Plate pins for clutch Ghr 2 masses

Plate pins for clutch Ghr 2 masses

Reference: 143.270.006

Brand: POLINI

Polini 6.2 hp engine intake manifold 143.270.006

Intake manifold for Polini 6.2 hp minimoto engine, carburetor connection diameter 19 mm. Distance between holes on the short side: 34 mm Distance between holes on the long side: 40 mm Code: 143.270.006

Reference: 095

Brand: DM

Dm rear fender molded resin for steel swingarm

Minimoto rear fender Dm in resin for steel swingarm. Shaped for steel swingarm, not compatible with aluminum swingarm. Dm code: 095

Reference: 112.286.00

Brand: GRC

Minimoto water tank vent connection

Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.

Reference: 143.270.013

Brand: POLINI

Minimoto intake manifold d.21 racing rubber steel 143.270.013

21 mm diameter rubber intake manifold for minimoto. The steel manifold is suitable for all minimoto with Italian engine, such as iame, cs, ghr, Polini, bzm, zocchi and others. Manifold compatible with PHBG 15 18 19 21 carburetor. Collector measures: Holes for fixing: 5.5 mm Distance between holes: 34x43 mm Carburetor inlet hole: 21-23 mm Code: 143.270.013