- On sale!
- Reduced price
- New
Xmotorstore Payments
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange.
Cs flange measurements:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange.
Cs flange measurements:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
Reference: X-SILred
Brand: XRACING
X-SIL carbon racing red minimoto silencer diameter 60 mm. Developed to ensure very high performance while maintaining the right level of sound absorption. Racing red anodized ergal cones. Central body in ultra-resistant carbon. High flow central barrel. Sound-absorbing in special composite with universal expansion and suitable for all minimoto mufflers....
Reference: 228.0002
Brand: POLINI
Spring for short muffler (56mm). The muffler spring is universal. Code: 228.0002
Reference: 228.0001
Brand: POLINI
Long exhaust muffler spring (70mm) 228.0001
Reference: IMA-20503
Brand: CS Racing
Iame exhaust gasket for flange 10 12 15. Cs exhaust gasket. ATTENTION: PACK OF 1 PIECE.
Reference: SCR.0282
Brand: CS Racing
Cs racing junior exhaust expansion Iame, for engines with flange 10, 12, 15 and flanged.
Reference: SCR.0287
Brand: CS Racing
Cs exhaust curve for flanged motors, standard version. Available: Cs exhaust curve for flange 10 motor. Cs exhaust curve for flange 12 motor. Cs exhaust curve for 15 flange motor. Cs exhaust curve for flanged engine.
Reference: IMA-10551
Brand: CS Racing
Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.
Reference: 332.0012
Brand: POLINI
Universal silencer support clamp diameter 60 mm with internal rubber ring. Ideal for supporting the silencer of minimoto, scooter, motorbike, and other vehicles. Material: Iron and Rubber Code: 332.0012
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 203 I
Brand: STAMAS
Pair of Stamas factory midi fork legs 25 mm diameter in stainless steel.
Reference: 112.145.60
Brand: GRC
Grc hydraulic front brake caliper bracket, Formula axial (D.25 fork legs) 112.145.60 Grc Code: 112.145.60 Grc hydraulic front brake caliper bracket, Formula axial (D.25 fork legs) WITHOUT SCREWS, IMAGE INDICATIVE THE PRODUCT IS SUPPLIED WITHOUT SCREWS
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: 001002R01400
Brand: DM
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems. DM Code: 001002R01400
Reference: 143.075.002
Brand: POLINI
Polini minimoto starter carter Ignition crankcase suitable for Polini engines with black Idm coil (2 irons) Polini code : 143.075.002
Reference: Deviaflussi-Cs
Brand: CS Racing
Iame CS flow diverter, available with the variants: oval / round diameter 15 or 21.
Reference: 8007
Brand: STAMAS
Pair of pins for fixing the head of the Stamas mini / midi swingarm motor
Reference: 001002R004A0
Brand: DM
Mini GP Dm fairing frame for BZM 25 step shock absorber
Reference: 001002R04700
Brand: DM
Soft throttle wire for minimoto, this throttle cable allows you to reduce the force required to rotate the throttle, allowing you to accelerate more smoothly and quickly. The gas cable is 90 cm long, with a diameter of 1 mm. DM Code: 001002R04700
Reference: GHR 046.001
Brand: GHR
Bell centering bush kit Ghr. The minibike bell bushing is used to keep the bell centred, by fixing the pinion.
Reference: 143.270.008
Brand: POLINI
Intake manifold 14 (SHA carburetor) for 6.2 hp engine 143.270.008. Elastic rubber Polini intake manifold, carburetor connection diameter 14 mm (SHA carburetor) for 6.2 HP engine crankcase. For 6.2 hp engine crankcase. Carburetor connection diameter D.19. For SHA carburetors. Rubber Elastic.
Reference: GHR 058.001
Brand: GHR
Ghr exhaust manifold for 50cc engine
Reference: GHR 558.040
Brand: GHR
Ghr exhaust manifold for 40cc air motor (10 12 15 and free). Available to choose between: Ghr exhaust manifold for 40cc air motor flange 10. Ghr exhaust manifold for 40cc flange 12 air motor. Ghr exhaust manifold for 40cc air motor flange 15. Ghr exhaust manifold for 40cc air motor flanged.
Reference: 143.395.015
Brand: POLINI
Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015
Reference: 143.025.002
Brand: POLINI
Segment diameter 36x1 mm for Polini minimoto 40cc air and h2o. Polini code: 143.025.002
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange.
Cs flange measurements:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm