- On sale!
- Reduced price
- New
Xmotorstore Payments
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange.
Cs flange measurements:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange.
Cs flange measurements:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
Reference: X-SILred
Brand: XRACING
X-SIL carbon racing red minimoto silencer diameter 60 mm. Developed to ensure very high performance while maintaining the right level of sound absorption. Racing red anodized ergal cones. Central body in ultra-resistant carbon. High flow central barrel. Sound-absorbing in special composite with universal expansion and suitable for all minimoto mufflers....
Reference: 228.0002
Brand: POLINI
Spring for short muffler (56mm). The muffler spring is universal. Code: 228.0002
Reference: 228.0001
Brand: POLINI
Long exhaust muffler spring (70mm) 228.0001
Reference: IMA-20502
Brand: CS Racing
Iame exhaust gasket for flange 10 12 15. Cs exhaust gasket. ATTENTION: PACK OF 1 PIECE.
Reference: SCR.0282
Brand: CS Racing
Cs racing junior exhaust expansion Iame, for engines with flange 10, 12, 15 and flanged.
Reference: SCR.0287
Brand: CS Racing
Cs exhaust curve for flanged motors, standard version. Available: Cs exhaust curve for flange 10 motor. Cs exhaust curve for flange 12 motor. Cs exhaust curve for 15 flange motor. Cs exhaust curve for flanged engine.
Reference: IMA-10551
Brand: CS Racing
Flanged Cs cylinder insert, the Cs racing cylinder insert is available in the following sizes: 10mm 12mm 15mm free.
Reference: 332.0012
Brand: POLINI
Universal silencer support clamp diameter 60 mm with internal rubber ring. Ideal for supporting the silencer of minimoto, scooter, motorbike, and other vehicles. Material: Iron and Rubber Code: 332.0012
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: FRZ.HM2
Brand: CS Racing
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: GM.3MS
Brand: CS Racing
Clutch spring guide 3 masses cs racing iame. Spring guide for universal 3-mass clutch, compatible with 3-mass plate BZM and CS racing.
Reference: TCM0601
Brand: Tecnominimoto
Detachable cylinder head for TCM 40 and 50 cc air-cooled minimoto cylinders. Detachable head with separate dome (not included). The head is compatible with: TCM, BZM, Orioli cylinders.
Reference: X-Filtro
Brand: XRACING
New X-F special racing air filter 100% MADE IN ITALY use: high performance racing universal for: minibike motorbike scooter pitbike brand: Xmotorstore & Marchald Red sponge length: 140mm diameter: 85mm connection diameter: 60/65 mm suitable for venturi. washable X-F was born from the experience gained in years of competitions and from various tests,...
Reference: IME-02000-C
Brand: CS Racing
Ignition flywheel Cs 80mm. The cs ignition rotor is compatible with iame, cs, bzm, Polini engines.
Reference: 143.600.003
Brand: POLINI
Polini reverso minibike coil. Original coil for Polini reverse engine. Code: 143.600.003
Reference: 1013
Brand: STAMAS
Pair of Stamas seatpost frame pads
Reference: TCM120
Brand: Tecnominimoto
TCM junior minimoto exhaust for 10 and 12 mm flanged engines. Tecnomoto junior minimoto muffler for flanged 10 and 12 mm with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 143.215.001
Brand: POLINI
Series of Polini studs fixing h2o cylinder Length: 98mm Diameter: 6 mm Code: 143.215.001
Reference: 143.802.017
Brand: POLINI
Minibike tank fairing Polini 910 rs 910 / 910 / 910 s, rs. Code 143.802.017
Reference: 143.330.005
Brand: POLINI
Complete water charging bottle Polini GP5 143.330.005
Reference: 112.350.05
Brand: GRC
Screw fuel tap to the GRC minimoto tank. Grc code: 112.350.05 Grc minimoto fuel tap, made in Italy.
Reference: SCR.0294
Brand: CS Racing
Minimoto muffler springs Cs. Cs racing exhaust springs for minibikes, these springs are to be applied between bend and expansion, and based on the type of silencer they are also adaptable between expansion and silencer. Total spring length 72 mm. Unloaded spring length (L0) 68 mm. Spring length without eyelet (Lk) 40 mm. External diameter of the coils...
Reference: KT0.0031
Brand: CS Racing
Cs clutch plate pins. Cs racing minimoto clutch plate pins. Thread: M8. Thread height: 5 mm.
Reference: stopper-lamelle-minimoto
Brand: BZM
Pair of minimoto reed stoppers with nuts and screws. Pair of "stoppers" to stop the minimoto reed valves, compatible with the following reed valves: Cs, Bzm, Zocchi, Polini, and others.
Reference: 213.0017
Brand: POLINI
Reed valve Polini 4.2 hp minimoto engine. Polini Code: 213.0017
Connection between cylinder and exhaust Cs Iame for flanged air-cooled engine. The flanged fitting, also called flange, is available in the following sizes: 10 Cs flange, 12 Cs flange, 15 Cs flange.
Cs flange measurements:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm