Xmotorstore Payments
Pair of oil seals for minimoto measuring 15x24x5 racing PTFE / FKM Polini, the most used minimoto oil seals on Cs, Polini, Iame, Bzm, Ghr, Beast, and others.
Fluorocarbon oil seals for racing mini bikes, very high thermal resistance and smoothness, ideal for high performance shafts.
Oil seal measures: external 24 mm internal 15 mm thickness 5 mm
Polini Code: 285.0007
Ean: 8054705085437
PERFECT TAKE Polini has created a series of sealing rings (oil seal) for the most common models of mopeds and scooters in circulation. Perfectly interchangeable with the originals, they can be mounted both on the crankshaft and on the primary shafts of the CVT transmissions. Made of FKM (fluorocarbon rubber) to withstand the highest thermal stress, they have the sealing lip coated with PTFE (polytetrafluoroethylene); this feature, in addition to making them more durable than standard sealing rings, means that they have a significantly lower coefficient of friction thus ensuring less dispersion due to friction and at the same time maintaining lower temperatures. These sealing rings have been designed for racing engines but are also perfectly suited to standard engines without an upgrade kit where, due to the low power available, the reduction in friction makes it possible to achieve higher revs. TECHNICAL CHARACTERISTICS Body in FKM. Steel metal armor. Inner lip coated in PTFE with very low friction coefficient
Reference: 143.195.002
Brand: POLINI
Minibike roller cage 10x13x14.5 mm. Roller cage for 10mm gudgeon pin, 13mm outer diameter, 14.5mm length.
Reference: NSK 6202 C4
Brand: XRACING
Pair of bearings minimoto engine Racing NSK C4. The high-slip mini-bike bearings, suitable for competition engines. NSK c4 motor bearings guarantee reliability and very high performance. Recommended application: Cs racing bearings, Iame bearings, Ghr bearings, Polini bearings, Bzm bearings, Tcm bearings, Beast bearings.
Reference: GHR 010.001
Brand: GHR
Complete 50cc engine Ghr gasket kit. The kit includes: - Cylinder base gaskets Ghr: 0.05 - 0.10 - 0.20 - 0.50 - Oring studs 5 pcs - Upper and lower dome oring (viton) 1 pc each - Oring head collision 1 pc - Oring viton exhaust 1 pc - Manifold and reed valve gaskets 1 pc each
Reference: IMZ-50995
Brand: CS Racing
Cs H2o engine gasket kit, for 40 and 50 cc engines.
Reference: IMZ-50992
Brand: CS Racing
Cs 40cc engine gaskets, available: Cs flange 10 gaskets, Cs flange 12 gaskets, Cs flange 15 gaskets.
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: 143.034.001
Brand: POLINI
Gasket kit for Polini 4.2 hp mini bike engine. Polini code: 143.034.001. Specific gaskets for Polini mini bikes with 4.2 hp engine.
Reference: 203.0044
Brand: POLINI
Polini CIV minibike air filter. Air filter for minibikes, version used in the Italian minibike championship, in the junior A category. Filter used on the Polini 6.2 hp flange 12 engine. Polini minibike civ filter. Carburettor connection diameter: 36 mm Air filter inclination: 30 degrees.
Reference: TCM/BZM 50 H20
Brand: Tecnominimoto
Minibike engine gasket kit BZM, TCM 50cc H2o. Complete kit of gaskets for 50cc minimoto Bzm and Tecnomoto engines.
Reference: Rac-sens-temp-mini
Brand: XRACING
Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...
Reference: Pistone36bzm
Brand: Tecnominimoto
Minibike piston diameter 36 mm for engines: Bzm, Tcm, Or, Malossi. The 36 mm diameter flat head piston is compatible with engines: Bzm, Tecnominimoto, Maloss, Orioli. 10mm plug.
Reference: 143.750.007
Brand: POLINI
Front brake disc for Polini minibike 122 mm, can be mounted on the right and left. We recommend the use of original Polini pads. Polini code: 143.750.007
Reference: 112.383.15
Brand: GRC
Seeger couple for minimoto clutch crankcase bearing. IN seeger for minimoto carter are used to keep the bell bearing in the correct seat. 112.383.15
Reference: 143.420.001
Brand: POLINI
Polini 910 rear brake caliper lever with spring. Polini 910 mini bike rear brake caliper lever with return spring included. Polini Code: 143.420.001
Reference: 143.025.005
Brand: POLINI
Segmento 40x1 mm cromato Polini per minimoto 50cc. Codice Polini: 143.025.005
Reference: 143.355.006
Brand: POLINI
Polini reverse water pump transmission belt. Transmission belt for Polini reverso engine water pump. The original Polini belt for the minimoto water pump. Code: 143.355.006
Reference: 001002SP1260
Brand: DM
Unique design racing seat pad, specially designed for DM minimoto. Dm code: 001002SP1260
Reference: Puleggia-ricambio-h2o
Brand: GRC
Replacement pulley for minimoto water pump. Universal replacement pulley for minimoto water pump. Outer diameter: 39 mm. Inner diameter: 8 mm. Compatible with Grc, Tcm, Cs, Bzm water pump, and others.
Reference: 120
Brand: DM
Dm handlebars complete with clamp diameter 28 mm
Reference: 5009
Brand: STAMAS
Bushings kit for front Stamas floating disc.
Reference: GHR 001.002
Brand: GHR
Complete Ghr minimoto engine gp1 h2o 50 factory racing. The engine is supplied complete with muffler, silencer.
Reference: SCR.0282
Brand: CS Racing
Cs racing junior exhaust expansion Iame, for engines with flange 10, 12, 15 and flanged.
Reference: 001002R031A0
Brand: DM
Gas cover DM 2 pieces. Transparent plastic. DM Code: 001002R031A0
Pair of oil seals for minimoto measuring 15x24x5 racing PTFE / FKM Polini, the most used minimoto oil seals on Cs, Polini, Iame, Bzm, Ghr, Beast, and others.
Fluorocarbon oil seals for racing mini bikes, very high thermal resistance and smoothness, ideal for high performance shafts.
Oil seal measures: external 24 mm internal 15 mm thickness 5 mm
Polini Code: 285.0007
Ean: 8054705085437
