Xmotorstore Payments
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: 5011
Brand: STAMAS
Stamas front brake disc 148 mm diameter floating.
Reference: 6010
Brand: STAMAS
Stamas sr standard disc protection.
Reference: 143.720.002
Brand: POLINI
Inner tube for 5 "Polini minimoto rim. Polini Code: 143.720.002
Reference: 143.750.005
Brand: POLINI
Polini 910 RS minimoto front brake caliper. Polini Code: 143.750.005 Polini 910 RS hull minimoto brake caliper, compatible with 5-inch and 6.5-inch versions.
Reference: IMZ-50992
Brand: CS Racing
Cs 40cc engine gaskets, available: Cs flange 10 gaskets, Cs flange 12 gaskets, Cs flange 15 gaskets.
Reference: 2036 8 18NC
Brand: PBR
Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.
Reference: 058DM
Brand: DM
Rear Hub 116 Mm 5 Holes Sprocket with bearings
Reference: 7004
Brand: STAMAS
Stamas minimoto internal steering head spacer
Reference: SCR.0294
Brand: CS Racing
Minimoto muffler springs Cs. Cs racing exhaust springs for minibikes, these springs are to be applied between bend and expansion, and based on the type of silencer they are also adaptable between expansion and silencer. Total spring length 72 mm. Unloaded spring length (L0) 68 mm. Spring length without eyelet (Lk) 40 mm. External diameter of the coils...
Reference: 143.175.001
Brand: POLINI
Water pump impeller reverse engine m5 left 143.175.001
Reference: 143.730.002
Brand: POLINI
Complete 5 "rear Polini rim. Polini Code: 143.730.002
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: 5009
Brand: STAMAS
Bushings kit for front Stamas floating disc.
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Disc protection Stamas sr r factory
