Xmotorstore Payments
Cs exhaust cylinder fitting for 40cc and 50cc engines without flange.
Cs fitting measures:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
Cs exhaust cylinder fitting for 40cc and 50cc engines without flange.
Cs fitting measures:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
Reference: 112.486.40
Brand: GRC
Muffler springs dismount tool, the spring puller is used to disassemble and assemble the springs from the muffler. Rubberized handle for better grip, curved tip compatible with all springs.
Reference: X-SILred
Brand: XRACING
X-SIL carbon racing red minimoto silencer diameter 60 mm. Developed to ensure very high performance while maintaining the right level of sound absorption. Racing red anodized ergal cones. Central body in ultra-resistant carbon. High flow central barrel. Sound-absorbing in special composite with universal expansion and suitable for all minimoto mufflers....
Reference: 228.0001
Brand: POLINI
Long exhaust muffler spring (70mm) 228.0001
Reference: IMZ-50995
Brand: CS Racing
Cs H2o engine gasket kit, for 40 and 50 cc engines.
Reference: SCR.0290
Brand: CS Racing
Cs curve for 40cc and 50cc h2o engines
Reference: 332.0012
Brand: POLINI
Universal silencer support clamp diameter 60 mm with internal rubber ring. Ideal for supporting the silencer of minimoto, scooter, motorbike, and other vehicles. Material: Iron and Rubber Code: 332.0012
Reference: 143.175.001
Brand: POLINI
Water pump impeller reverse engine m5 left 143.175.001
Reference: 112.383.15
Brand: GRC
Seeger couple for minimoto clutch crankcase bearing. IN seeger for minimoto carter are used to keep the bell bearing in the correct seat. 112.383.15
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 1015 R S
Brand: STAMAS
Replacement pair of Stamas adjustable footrest supports
Reference: 112.240.14
Brand: GRC
Lower motor pin Grc d.14 midi rrz-3
Reference: 112.486.15
Brand: XRACING
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: GHR 558.040
Brand: GHR
Ghr exhaust manifold for 40cc air motor (10 12 15 and free). Available to choose between: Ghr exhaust manifold for 40cc air motor flange 10. Ghr exhaust manifold for 40cc flange 12 air motor. Ghr exhaust manifold for 40cc air motor flange 15. Ghr exhaust manifold for 40cc air motor flanged.
Reference: 1009
Brand: STAMAS
Standard Stamas chain tensioner couple
Reference: GHR 059.001
Brand: GHR
Ghr team expansion for 50cc engine. With springs and anti-vibration
Reference: pinz-ass-post-form
Brand: Formula
Formula axial rear caliper. Rear hydraulic caliper for minimoto, axial attachment. Rear brake caliper for Blata and other minimoto, with axial attachment. The caliper kit includes the pads. Attention: Made to order, delivery 4 weeks.
Reference: KT0.0031
Brand: CS Racing
Cs clutch plate pins. Cs racing minimoto clutch plate pins. Thread: M8. Thread height: 5 mm.
Reference: Batteria-K2RE
Brand: Arianetech
Ariane K2re electric minibike battery. Removable and interchangeable battery weighing 8 kg, capable of maintaining maximum power for 40 minutes offering full power. With the optionally available quick charger, it is fully charged in just 15 minutes. With the standard charger in two hours. This way, you have absolutely no limitations when it comes to...
Reference: IMZ-50995
Brand: CS Racing
Cs H2o engine gasket kit, for 40 and 50 cc engines.
Reference: X-SILred
Brand: XRACING
X-SIL carbon racing red minimoto silencer diameter 60 mm. Developed to ensure very high performance while maintaining the right level of sound absorption. Racing red anodized ergal cones. Central body in ultra-resistant carbon. High flow central barrel. Sound-absorbing in special composite with universal expansion and suitable for all minimoto mufflers....
Reference: 143.695.009
Brand: POLINI
Locking key for Polini 2-mass clutch group 143.695.009. Polini clutch locking key for minimoto. The Polini clutch locking key is compatible with all engines that have hole spacing: 74 mm.
Cs exhaust cylinder fitting for 40cc and 50cc engines without flange.
Cs fitting measures:
Center distance of cylinder attachment holes 47 mm
Screw connection hole 6.5 mm
Manifold connection 28 mm
Base plate thickness 4 mm
Height of pipe connection manifold 15 mm
