Xmotorstore Payments
Universal radiator for minimoto, standard curved version.
Radiator weight 535 grams.
Hose connection 12 mm.
Universal radiator for minimoto, standard curved version.
Radiator weight 535 grams.
Hose connection 12 mm.
Reference: 001002R07600
Brand: DM
Water pump support bracket for Dm. For Iame cs, tcm, bzm pump. 001002R07600
Reference: 9005 S
Brand: STAMAS
Upper bracket for Stamas radiator support
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: tubo-sil-1mt
Brand: XRACING
Racing silicone water hose for motorcycle cooling systems. Ø10x19 mm. Available in yellow or orange. Sold per meter.
Reference: 143.804.036
Brand: POLINI
Polini 910 minimoto chain cover, protects pinion, crown and chain. Polini Code: 143.804.036
Reference: 143.330.003
Brand: POLINI
Polini minibike water tank. Polini code: 143.330.003 Water filling bottle for Polini minibike cooling system, the tray includes a cap.
Reference: 143.680.004
Brand: POLINI
Polini REVERSO engine winding wheel. Polini code: 143.680.004 ATTENTION: SPECIFIC FOR REVERSO ENGINE.
Reference: 001002SP089A
Brand: DM
Minimoto fork plates pin Dm, for midi version. Dm code: 001002SP089A
Reference: zocchi-1000102-C2
Brand: Zocchi
Replacement clutch shoes for minimoto Zocchi C2. Pair of clutch shoes Zocchi version C2. Compatible with Zocchi plate for long shoes.
Reference: 143.415.006
Brand: POLINI
Polini 910 RS minimoto fork plates. Fork plates 2WB for straight steerer. Polini Code: 143.415.006 Polini minimoto fork plates in aluminum. Color: gray Total width: 170 mm. Hole diameter for stem: 24 mm. Steering stem pin diameter: 10 mm. Fork stem center distance: 134 mm. The kit includes the necessary screws for assembly.
Reference: 001002R026A0
Brand: DM
Pair of rear wheel bearings and spacer 120 DM. DM Code: 001002R026A0
Reference: 143.075.010
Brand: POLINI
Polini clutch side closed crankcase for reverse engine 143.075.010
Reference: 143.762.013
Brand: POLINI
Seat for fairing 910 s / gp3 (with biadhesive) 143.762.013
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: IMA-01050
Brand: CS Racing
Cylinder for 40cc air-cooled minibike with Iame Cs brand cast iron barrel, it is possible to use the following flanges for this cylinder: flange 10, flange 12, flange 15, free exhaust. DELIVERY TIME: 90 DAYS
Reference: Kit-viti-disco-corona-dm
Brand: XRACING
Sprocket and brake disc bolt kit for DM minimoto. Includes 6 bolts (3 for disc, 3 for sprocket). M5 thread, 25 mm long. Fits original DM hub.
Reference: Molle.rac.cs
Brand: CS Racing
Cs muffler exhaust fitting springs. Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold. Attention: pair of springs, specific for Cs minibike muffler. Total spring length 35 mm. Unloaded spring length (L0) 32 mm. Spring length without eyelet (Lk) 17 mm. External diameter of the coils (De)...
Reference: 074
Brand: DM
Replacement Quick Coupling Front Fairing
Reference: Carter+campana.CS
Brand: CS Racing
Cs racing bell carter with bell. Cs racing minimoto clutch cover. Clutch cover available with bell: 81mm 80mm 79mm 78mm 77mm
Universal radiator for minimoto, standard curved version.
Radiator weight 535 grams.
Hose connection 12 mm.
