Xmotorstore Payments
Complete radiator bracket kit for all DM models
Reference: 001002R085A0
Brand: DM
Curved racing DM mini-bike radiator Top width 21 cm Bottom width 17 cm Thickness 5 cm
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 132
Brand: DM
Increased Dm minibike radiator, the oversized Dm radiator is dedicated to racing minibikes, it allows better engine cooling even in the most extreme conditions of use. Radiator weight Dm: 566 grams Pipe connections: 10 mm Attention: Artisan radiator handmade to order, delivery time 30 days.
Reference: tubo-sil-1mt
Brand: XRACING
Racing silicone water hose for motorcycle cooling systems. Ø10x19 mm. Available in yellow or orange. Sold per meter.
Reference: FM10191-40
Brand: Formula
Formula minibike front braided brake hose M8 - M6. Formula code: FM10191-40 Formula hydraulic front brake hose for minibikes, specific for versions from 2023 onwards, with M8 pump side connection and M6 caliper connection.
Reference: 143.075.011
Brand: POLINI
Original Polini sprocket guard for Reverso minimoto engine. Code 143.075.011. Essential protection for rider and transmission.
Reference: TCM163
Brand: Tecnominimoto
TCM minimoto muffler for 50 cc engines. Tecnomoto minimoto muffler with non-decomposable manifold. Complete exhaust for minimoto with 50cc 2t water-cooled engine. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: FM40024-10
Brand: Formula
Kit screws and o-rings for Formula minimoto minicross radial front caliper. Formula Code: FM40024-10
Reference: 2036 8 18NC
Brand: PBR
Minimoto sprocket M10 Z8. Reinforced mini-bike sprocket with 8-tooth M10 thread. Compatible with bell: CS, Iame, Bzm, Ghr, Xracing.
Reference: 001002R075B0
Brand: DM
Universal mini bike stand resistant and practical stand for minimoto support. DM Code: 001002R075B0
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 112.209.05
Brand: GRC
Red aluminum mini bike handlebars, universal for mini bikes with 22mm half handlebars. The handlebar pads, or rocker arms are essential for the protection of the motorcycle in case of falls.
Reference: 001002R026B0
Brand: DM
Minimoto Dm standard wheel bearings, 10 pieces. DM Code: 001002R026B0
Reference: 001002A02900
Brand: DM
Minimoto upper engine support pin Dm, 2 pieces.
Reference: GHR 023.001
Brand: GHR
Ghr factory crankshaft stroke 39.6 with cnc connecting rod. Ghr minibike crankshaft, compatible with almost all Italian minibike engines. Average crankshaft weight Ghr: 735 g.
Reference: 143.340.042
Brand: POLINI
Polini silencer support bracket and tail. Polini Code: 143.340.042
Reference: 280.0007
Brand: POLINI
Polini water pump overhaul kit, Polini code: 280.0007
Reference: 25610100
Brand: Tecnominimoto
Blata crankshaft 39.8 Tcm. Crankshaft factory 39.8 conrod CNC for Blata minimoto engines. Attention: replacement for original Blata, not a replica.
Reference: FM10022-10
Brand: Formula
Formula axial caliper for minibikes and minicross. Pads included. 5 mm tube ring connection. Distance between fixing holes: 55 mm. Caliper thickness: 42 mm.
Complete radiator bracket kit for all DM models
