Xmotorstore Payments
Left front brake caliper lever with spring. Polini code: 143.420.003.
Left front brake caliper lever with Polini spring for minibike.
Left front brake caliper lever with spring. Polini code: 143.420.003.
Left front brake caliper lever with Polini spring for minibike.
Reference: IMG-02000-15
Brand: CS Racing
Reed valve Cs for minimoto. The Cs reed valve pack allows greater performance thanks to the viton coating. Divert flows not included.
Reference: 143.310.002
Brand: POLINI
Reverse engine ignition nut with starter coupling. Replacement for Polini reverso minimoto. Polini Code: 143.310.002
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: 112.240.14
Brand: GRC
Lower motor pin Grc d.14 midi rrz-3
Reference: 044
Brand: DM
Minimoto swingarm Dm 2025 center distance 272 mm. The new Dm 2025 swingarm has been reinforced and improved, allowing a better ride and a longer life even in conditions of maximum stress. The mini bike will be more responsive and stable. Dm code: 044
Reference: GHR 007.001
Brand: GHR
Viton exhaust oring gasket 5 pieces for flange Ghr
Reference: 143.801.030
Brand: POLINI
Polini 911 front fairing white, includes right and left side. Polini code: 143.801.030
Reference: IMB-20200
Brand: CS Racing
Scratch bank engine 25x35 thickness 0.10 Iame (10 pieces)
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: 143.405.003
Brand: POLINI
Reed valve for 6.2 hp engine with inserts. The Polini minibike reed valve is compatible with Polini 6.2 crankcases. Polini Code: 143.405.003
Reference: 001002R075B0
Brand: DM
Universal mini bike stand resistant and practical stand for minimoto support. DM Code: 001002R075B0
Reference: 2010/28
Brand: STAMAS
Pair plates for fork stems d.28 factory Stamas
Reference: SCR.0287
Brand: CS Racing
Cs exhaust curve for flanged motors, standard version. Available: Cs exhaust curve for flange 10 motor. Cs exhaust curve for flange 12 motor. Cs exhaust curve for 15 flange motor. Cs exhaust curve for flanged engine.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Left front brake caliper lever with spring. Polini code: 143.420.003.
Left front brake caliper lever with Polini spring for minibike.
