Xmotorstore Payments
Flywheel rotor diameter 90 mm for Ghr engine complete with levers. Ghr code: GHR 080.001
Flywheel rotor diameter 90 mm for Ghr engine complete with levers. Ghr code: GHR 080.001
Reference: IME-03000
Brand: CS Racing
Selettra racing minimoto coil, Selettra 3500 racing coil model. This reel is suitable for minimoto and minicross. Compatibility: iame cs coil, Bzm coil, Ghr coil, Zocchi coil, Beast coil, Lem coil.
Reference: br10eg ngk
Brand: NGK spark plug
Ngk BR10EG spark plug for motorcycles Code: BR10EG Ngk br10eg spark plug details: Hex: 20.8mm Thread diameter: 14.0mm Thread length: 19.0mm Electrode distance: 0.6 mm Resistance: resistive, 5 KOhm Ean code: 87295138304
Reference: 246215063
Brand: NGK spark plug
Ngk BR9EG candle. Code: BR9EG. Stock No.:3230 Details: Hex: 20.8mm Thread diameter: 14.0mm Thread length: 19.0mm Electrode distance: 0.6 mm Resistance: resistive, 5 KOhm
Reference: 143.530.001
Brand: POLINI
Flywheel fins for minimoto, the flywheel levers are used to engage the starter during ignition. These flywheel levers are compatible with Polini, Iame, Bzm, Cs, Ghr. Polini Code: 143.530.001
Reference: Sel.Blu.2022
Brand: CS Racing
Minimoto Selettra coil, blue color, with CIV 2024 marking. This coil is compatible with Cs, Iame, Ghr, Bzm, Zocchi, Tcm, Beast. The coil is marked CIV 2024, to be used in the Italian minimum championship, and FMI races. Selettra 3500 minimoto coil assembly features: The distance between the holes of the blue coil is 52 mm, the holes are 6 mm. ATTENTION:...
Reference: 2011
Brand: STAMAS
Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.
Reference: 143.630.015
Brand: POLINI
Front wheel pin with spacers for Polini 910/911 minimoto for mounting 6.5 "rims code 143.630.015
Reference: 54214200
Brand: Tecnominimoto
Minibike crankshaft Tcm stroke 39.2 for engines: Bzm, Ghr, Quattrini, Cs, Medos, Polini, Zocchi.
Reference: 143.010.011
Brand: POLINI
Cylinder with piston water transfers 3 d.36. Polini code: 143.010.011
Reference: MAS.HM1
Brand: CS Racing
Pair of weights for GT HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: 007
Brand: DM
DM black aluminum fork legs for minimoto. 28 mm diameter, 2025 model. Compatible with DM triple clamps from 2020 onwards. Code 007.
Reference: 143.250.001
Brand: POLINI
Polini mini bike head support silentblock. Polini Code: 143.250.001
Reference: F00 002 - 029
Brand: DM
Formula rear axial caliper support for Dm. Support for Formula rear brake on Dm minibike. Code: F00 002
Reference: 143.305.002
Brand: POLINI
Series of screws and nuts for Polini air-powered minimoto engines Code: 143.305.002 Screws and nuts for Polini mini bikes with 40 2T air engine
Reference: 143.075.009
Brand: POLINI
Starter casing minimoto Polini reverse 143.075.009
Reference: 143.130.001
Brand: POLINI
Reverso Polini water pump shaft. Original Polini spare part. Code: 143.130.001.
Reference: 6008/12
Brand: STAMAS
Stamas rear fender sr r factory. Code: 6008/12
Reference: Xmts.inox.40
Brand: XRACING
Stainless steel xmotorstore exhaust manifold, for Cs Iame 40cc engine. Made by hand in Italy, the union of the first choice stainless steel material and the craftsmanship make the collector performant for racing use and resistant to any extreme conditions. The heat resistance and the ability to quickly dispose of the exhaust gas make the collector...
Flywheel rotor diameter 90 mm for Ghr engine complete with levers. Ghr code: GHR 080.001
