Xmotorstore Payments
Flywheel fins for minimoto, the flywheel levers are used to engage the starter during ignition. These flywheel levers are compatible with Polini, Iame, Bzm, Cs, Ghr.
Polini Code: 143.530.001
Flywheel fins for minimoto, the flywheel levers are used to engage the starter during ignition. These flywheel levers are compatible with Polini, Iame, Bzm, Cs, Ghr.
Polini Code: 143.530.001
Reference: 010.0743
Brand: POLINI
Minimoto starter handle, universal for minibikes with pull starter with rope. Polini Code: 010.0743
Reference: 143.265.001
Brand: POLINI
Polini minibike starter rope roller return spring. Polini Code: 143.265.001
Reference: 143.680.002
Brand: POLINI
Polini minimoto starter wheel, compatible with Polini starter and others. The rope winder wheel is used to engage the ignition with the flywheel, in order to start the minimoto. Wheel external diameter: 71 mm Rope channel: 3.5 mm Polini Code: 143.680.002
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: 143.800.072
Brand: POLINI
Front left disc cover for Polini 910 RS minimoto. Polini Code: 143.800.072 Polini S and RS minimoto front disc protection.
Reference: 112.286.00
Brand: GRC
Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.
Reference: Batteria-K2RE
Brand: Arianetech
Ariane K2re electric minibike battery. Removable and interchangeable battery weighing 8 kg, capable of maintaining maximum power for 40 minutes offering full power. With the optionally available quick charger, it is fully charged in just 15 minutes. With the standard charger in two hours. This way, you have absolutely no limitations when it comes to...
Reference: LAM.001
Brand: CS Racing
Fiberglass reed petals for CS minimoto reed valve. Compatible with all Italian minimoto brands. Available in 0.20 - 0.25 - 0.32 - 0.37 mm. Pair of CIV approved CS fibre slats: (select thickness 0.32 for junior A & B CIV & simoncelli single-cylinder engines).
Reference: 112.486.40
Brand: GRC
Muffler springs dismount tool, the spring puller is used to disassemble and assemble the springs from the muffler. Rubberized handle for better grip, curved tip compatible with all springs.
Reference: 332.0012
Brand: POLINI
Universal silencer support clamp diameter 60 mm with internal rubber ring. Ideal for supporting the silencer of minimoto, scooter, motorbike, and other vehicles. Material: Iron and Rubber Code: 332.0012
Reference: Rac-sens-temp-mini
Brand: XRACING
Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...
Reference: GHR 032.002
Brand: GHR
G-radius black Ghr minimoto clutch plate with 2 adjustable masses. The best clutch plate for a precise and quick setting of your clutch. Plate weight 130g compatible with Iame, Cs, Bzm, Polini, Ghr, Zocchi engine.
Reference: 143.395.020
Brand: POLINI
Polini minimoto rear brake wire, for mechanical brakes. Polini code: 143.395.020
Reference: 143.340.035
Brand: POLINI
Original Polini engine support brackets for GP3 air-cooled minimoto. Code 143.340.035. Strong and reliable racing part.
Reference: GHR 026.001
Brand: GHR
Roller cage for Ghr big end. Roller cage measures 14X18X10 mm (shaft axis side).
Reference: 7013
Brand: STAMAS
Spacer outside sprocket side for 5007P Stamas hub
Reference: 143.195.002
Brand: POLINI
Minibike roller cage 10x13x14.5 mm. Roller cage for 10mm gudgeon pin, 13mm outer diameter, 14.5mm length.
Reference: 001002R003A0
Brand: DM
Anti-vibration inserts kit for DM 3-piece rear fender. DM Code: 001002R003A0
Reference: TCM70
Brand: Tecnominimoto
Cnc made Tcm crankcase in red color, for Bzm 690 crankcase for bells from 80 to 86 mm.
Flywheel fins for minimoto, the flywheel levers are used to engage the starter during ignition. These flywheel levers are compatible with Polini, Iame, Bzm, Cs, Ghr.
Polini Code: 143.530.001
