- On sale!
- Reduced price
- New
Xmotorstore Payments
Complete Stamas sr r factory fairings kit including mudguards and raw disc protection.
Reference: Grafica adesiva STAMAS R red
Brand: XRACING
Adhesive graphics for Stamas racing red minimoto
Reference: G.Stms.Xmts
Brand: STAMAS
Stamas 2021 minimoto adhesive graphics, xmotorstore team coloring, compatible with Stamas mini and midi fairings. The graphics are adhesive, no glue is needed, just apply it to the hull. Race number customizable on request.
Reference: tcm201835
Brand: Tecnominimoto
DM red front hub, universal for new and old model rims.
Reference: 2012 A
Brand: STAMAS
Pair of Stamas factory mini fork tubes diameter 25 mm in aluminum. Gold colored aluminum.
Reference: 2017/28
Brand: STAMAS
Pair cnc fork caps d.28 Stamas Weight : 15g
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 2024
Brand: STAMAS
Stamas front end kit diameter 28 Composed of: stainless steel fork legs d. 28 dumbbell seeds d. 28 detachable semi-handlebar collars fork plates front hub
Reference: GHR 559.010
Brand: GHR
Ghr expansion for 40cc air motor (10 12 15 and free). Available to choose between: Ghr expansion for 40cc flange 10 air motor. Ghr expansion for 40cc flange 12 air motor. Ghr expansion for 40cc flange 15 air motor. Ghr expansion for 40cc flanged air motor.
Reference: 335.033.02
Brand: Blata
Collar semi-handlebars for stems 28mm Blata Attention: 1 piece, not the pair.
Reference: 9004
Brand: STAMAS
Stamas racing oversized mini-bike radiator. The oversized radiator allows the correct temperature of the coolant to be maintained even in racing conditions.
Reference: Molle.rac.cs
Brand: CS Racing
Cs muffler exhaust fitting springs. Short cs minibike muffler springs, these springs are applied between the "cylinder" connection and the exhaust manifold. Attention: pair of springs, specific for Cs minibike muffler. Total spring length 35 mm. Unloaded spring length (L0) 32 mm. Spring length without eyelet (Lk) 17 mm. External diameter of the coils (De)...
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: PT0.0021
Brand: CS Racing
CS racing clutch plate, available in various weights of your choice. Plate for 2 masses clutch, compatible with Polini clutch and bzm clutch.
Reference: clt.min.cin
Brand: XRACING
Chinese minimoto manifold for Sha carburetor. The aluminum manifold for Chinese minimoto is compatible with all Chinese air-cooled minimoto engines, allows the assembly of the SHA 16 Dellorto carburetor. The manifold is interchangeable with the original plastic.
Reference: 112.286.00
Brand: GRC
Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.
Reference: IMA-20100-0.05
Brand: CS Racing
Iame Cs cylinder gasket (5 pieces)
Reference: 112.480.00
Brand: GRC
Universal Grc mini bike stand. The stand is used to hold the mini bike still by hooking onto the footpegs, it keeps the rear wheel raised, so as to allow it to turn in case of ignition. Grc Code: 112.480.00
Reference: 143.340.040
Brand: POLINI
Polini 910 minibike fairing support brackets. Polini code: 143.340.040 Polini 910 minibike fairing support brackets, set of 2 pieces.
Complete Stamas sr r factory fairings kit including mudguards and raw disc protection.