Xmotorstore Payments
Ghr starter cover in ergal. Compatible with Bzm, Iame, Cs, Ghr engines.
Ghr starter cover in ergal. Compatible with Bzm, Iame, Cs, Ghr engines.
Reference: GHR 080.001
Brand: GHR
Flywheel rotor diameter 90 mm for Ghr engine complete with levers. Ghr code: GHR 080.001
Reference: 143.530.001
Brand: POLINI
Flywheel fins for minimoto, the flywheel levers are used to engage the starter during ignition. These flywheel levers are compatible with Polini, Iame, Bzm, Cs, Ghr. Polini Code: 143.530.001
Reference: 001002A02900
Brand: DM
Minimoto upper engine support pin Dm, 2 pieces.
Reference: 2006
Brand: STAMAS
Pair of 24 mm Stamas standard half handlebars
Reference: 091001
Brand: GHR
Connection between cylinder and exhaust for minimoto, compatible with: GHR, BZM, CS, IAME. The flange also includes the three high temperature O-rings, the O-rings allow to avoid the escape of the exhaust gases from the junction between the manifold and the curve and between the cylinder and the flange. Professional collector, in first choice metal....
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 1013
Brand: STAMAS
Pair of Stamas seatpost frame pads
Reference: 120
Brand: DM
Dm handlebars complete with clamp diameter 28 mm
Reference: IMA-01050
Brand: CS Racing
Cylinder for 40cc air-cooled minibike with Iame Cs brand cast iron barrel, it is possible to use the following flanges for this cylinder: flange 10, flange 12, flange 15, free exhaust. DELIVERY TIME: 90 DAYS
Reference: Ariane-K2Re
Brand: Arianetech
Ariane K2Re was designed in response to the models that are the reference among the current minibikes, but in an electric version. For this reason it is equipped with an electric unit with a maximum power of 6.5 kW (8.5 HP), adjustable in multiple parameters via a USB port that connects to a laptop to adapt to the needs of every rider, from the beginner...
Reference: 4014
Brand: STAMAS
Cnc support for rear brake caliper mechanical factory Stamas
Reference: 143.330.003
Brand: POLINI
Polini minibike water tank. Polini code: 143.330.003 Water filling bottle for Polini minibike cooling system, the tray includes a cap.
Reference: IMB-01000-C
Brand: CS Racing
Crankcase Cs racing Iame for 50cc 40cc minibike engine. New minimoto engine crankcase developed to achieve maximum performance, engine crankcase compatible with 40cc and 50cc. Engine crankcase weight cs: 1052 g
Reference: GHR 022.001
Brand: GHR
GHR Engine Mount. Completely in stainless steel. Compatible with Bzm engine block, suitable for water pipe passage.
Reference: TCM32
Brand: Tecnominimoto
Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.
Reference: 001002R08000
Brand: DM
hardware kit for frame and minimoto fairings Dm
Reference: 143.800.066
Brand: DM
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099. Dm code: 098
Ghr starter cover in ergal. Compatible with Bzm, Iame, Cs, Ghr engines.
