Xmotorstore Payments
2 masses minimoto clutch spare parts kit. The kit is compatible with Cs, Iame, Ghr, Polini clutch.
2 masses minimoto clutch spare parts kit. The kit is compatible with Cs, Iame, Ghr, Polini clutch.
Reference: PT0.0021
Brand: CS Racing
CS Racing minimoto clutch plate. Dual-mass clutch plate, compatible with CS, Polini, BZM, IAME, TCM clutches, and others. Dedicated clutch plate for Junior A and Junior B single-engine bikes! CIV approved.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: TCM012
Brand: Tecnominimoto
TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.
Reference: 143.801.030
Brand: POLINI
Polini 911 front fairing white, includes right and left side. Polini code: 143.801.030
Reference: 9005 L
Brand: STAMAS
Side brackets radiator support Stamas race
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 2012 A
Brand: STAMAS
Pair of Stamas factory mini fork tubes diameter 25 mm in aluminum. Gold colored aluminum.
Reference: 143.190.002
Brand: POLINI
Set of bearings with caps for Polini scooter steering. Polini code: 143.190.002 Polini scooter steering bearings, last pieces available.
Reference: 112.145.67
Brand: GRC
Spacer for front hub-disc 3 holes L.4 mm. for plumbing. Weight 9grams
Reference: 7008
Brand: STAMAS
Stamas standard internal rear hub spacer
Reference: 001002A002A0
Brand: DM
Dm mini bike tail in black painted steel. Standard model for mini and midi.
Reference: 143.020.007
Brand: POLINI
Polini mini bike piston diameter 36 mm for 40cc engines. The racing version Polini minimoto piston differs from the standard for the position of the segment stop pin. Polini Code: 143.020.007 ATTENTION: SPECIFIC VERSION FOR 40 cc h2o.
Reference: 105018001
Brand: POLINI
BZM cylinder gasket kit Ø40 (50cc) compatible with Polini Reverse minimoto engines. Code 105018001.
Reference: Z.200.0021
Brand: Zocchi
Pinion minimoto Blata C1 M8x1. Pinion made in Italy, specific for Blata C1 minimoto with M8x1 thread pitch, only for Chinese bells with full thread connection.
Reference: 144.750.008
Brand: POLINI
Pair of Polini minibike mechanical brake pads, Polini minibike brake pads have a hole distance of 22 mm. CODE: 144.750.008
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 143.730.003
Brand: POLINI
Polini front 5 "rim for double brake. Polini Code: 143.730.003
Reference: 143.160.015
Brand: POLINI
Plate for clutch 2 masses reverso engine
2 masses minimoto clutch spare parts kit. The kit is compatible with Cs, Iame, Ghr, Polini clutch.
