- On sale!
- Reduced price
- New
Xmotorstore Payments
Reference: 143.800.066
Brand: DM
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099. Dm code: 098
Reference: 215.0224
Brand: POLINI
Polini 4.2 hp engine intake manifold, external diameter 19 mm (carburetor connection), internal diameter 15 mm. The manifold is compatible with 4.2 hp and Peugeot 103 minimoto engine. Polini Code: 215.0224
Reference: PISTONE IAME 40CC
Brand: CS Racing
Piston Cs 40cc minimoto. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: 143.425.033
Brand: POLINI
Muffler for Polini minimoto with 6.2 hp engine. Polini Code: 143.425.033
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 112.010.69
Brand: GRC
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: GHR 068.015
Brand: GHR
Ghr flow diverter GHR flow diverter inserts for VITON reed valve. CNC machined flow diverters for maximum quality and performance on your minimoto. Compatible with iame, tcm, and other VITON reed valves. Available in variants: Ghr flow diverter 15 mm. Ghr flow diverter 21 mm.
Reference: 112.156.12
Brand: GRC
Grc front disc support d.145 floating. Grc Code: 112.156.12
Reference: 143.030.001
Brand: POLINI
Pin 10x30 mm 40cc K2D Polini 143.030.001
Reference: 5011
Brand: STAMAS
Stamas front brake disc 148 mm diameter floating.
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 143.803.021
Brand: POLINI
Rear tail 910 white 143.803.021
Reference: 143.002.002
Brand: POLINI
Polini air 6.2 junior minimoto engine. The air-cooled Polini 6.2 engine is suitable for children and Junior categories. The 6.2 hp engine is supplied with a 14.14 L Dellorto carburettor, including fuel pipe and throttle cable.
Reference: 143.761.001
Brand: POLINI
Complete Polini petrol tap. Code: 143.761.001
Reference: reg.for.dm
Brand: DM
Pair of adjusters for minibike swingarm DM up to 2007. Mechanical adjusters for minibike swingarm in mini and midi version.
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Front cnc front guard support dm