- New
Xmotorstore Payments
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch.
As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch.
As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: KT0.0029
Brand: CS Racing
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Reference: MLL.0041
Brand: CS Racing
Blue clutch springs for minimoto, wire 2, 3mm (JUNIOR). The blue springs replace the previous purple version, they are recommended on junior engines.
Reference: MLL.0042
Brand: CS Racing
Red clutch springs for minimoto, wire 2, 5mm. Red springs are recommended on open engines.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: GHR035.003
Brand: GHR
Mini-bike clutch shoes GHR 2 masses 2G G-Carbotech. Massette for minimoto clutch, compatible with: Ghr, Cs, Tcm, Bzm, Polini. The GHR masses are suitable for racing use, perfect for short and long slopes, compatible with engines: Bzm, Iame, Cs, Tcm, Ghr. We recommend using an 81mm bell for running-in, and an 80mm bell for use.
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: TCM012
Brand: Tecnominimoto
TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.
Reference: 1612208
Brand: Malossi
Malossi phbg 21 ds 1612208 fuel system Malossi code: 1612208 Malossi phbg 21 bs fuel system with mixer connection Application: Malossi fuel system for APRILIA RS 50 2T LC (MINARELLI AM 3 > 6) for vehicles PRODUCED 2000 --> Malossi fuel system for APRILIA TUONO 50 2T LC (MINARELLI AM 6) Malossi fuel system for BETA RR ENDURO 50 2T LC (MINARELLI AM...
Reference: 209.0226
Brand: POLINI
Polini GT D.47 H2O gasket kit for Minarelli horizontal. Code 209.0226. Complete set for liquid-cooled cast iron cylinders, compatible with Minarelli horizontal engines.
Reference: 01.SZ.0313.L
Brand: Ohvale
Ohvale Spring oil fine filterCode: 01.SZ.0313.L
Reference: 01.SB.0702.L
Brand: Ohvale
Ohvale Oil pump sprocket shaft Code: 01.SB.0702.L
Reference: 01.SZ.0604.L
Brand: Ohvale
Ohvale Oil drain plug Code: 01.SZ.0604.L
Reference: 242.382
Brand: POLINI
Polini rollers 24x18 pieces 6. Available: 242.190 ROLLS 24X18 GR.22.5 242.382 ROLLS 24X18 GR.18,0 242.383 ROLLS 24X18 GR.19,0 242.189 ROLLS 24X18 G. 29.6
Reference: 204.0773/A
Brand: POLINI
Polini piston 47.6 mm selection A (47.545 mm) 204.0773/A
Reference: 173.0003
Brand: POLINI
POLINI: RICAMBI UNIVERSALI - RICAMBI ACCENSIONE
Reference: 140.0207
Brand: POLINI
Polini thermal group kit diameter 47.6 mm, stroke 39.3 mm, connecting rod 85 mm Pin 12 mm. Polini code 140.0207. Attention: this kit must be mounted with the motor shaft code: 210.0020
Reference: 249.058
Brand: POLINI
Clutch Vespa 125 Primavera 4T 3V ie 3G For race diameter 125 mm Code: 249.058 Diameter: 125 mm Weight: 939 gr. Application: Vespa 125 4T Primavera 3V ie, Vespa 125 4T Sprint 3V ie, Vespa 125 4T Primavera iGET 3V ie E4, Vespa 125 4T Sprint iGET 3V ie E4, Piaggio, Piaggio Liberty 125 3V ie from 2013 to 2014/125 iGET 3V ie E4
Reference: 01.SZ.0716.L
Brand: Ohvale
Ohvale Lock nut clutchCode: 01.SZ.0716.L
Reference: 204.0350
Brand: POLINI
Polini piston for Vespa 125 T5 diameter 61 mm. Polini code: 204.0350 Polini piston for: Vespa, Vespa 125, Polini
Reference: 173.0010
Brand: POLINI
Vespa gas control fixing pipe, code 173.0010 Vespa throttle control fixing pipe for: Vespa, Vespa 125 2t pk, Vespa 125 2t primavera, Vespa 125 2t px, Vespa 125 2t xl, Vespa 125 2t et3, Vespa 125 2t ets, Vespa 125 2t ts, Vespa 50 2t special, Vespa 50 2t pk, Vespa 50 2t xl, Vespa 200 2t pe, Vespa 200 2t px Vespa gas control fixing pipe for Polini gas...
Reference: 03.FO.0020.L
Brand: Ohvale
Pivot washer Ohvale Gp-0 110/160 EVO Code: 03.FO.0020.L
Reference: 01.SB.0325.L
Brand: Ohvale
Ohvale Outer valve spring retainer Code: 01.SB.0325.L
Reference: 112.486.00
Brand: GRC
2-mass clutch unit extractor. Minimoto clutch extractor for all Italian engines.
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch.
As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).