Plastic protection for the front disc DM

Reference: 6006

Brand: STAMAS

Monocoque raw Stamas sr r factory

Raw monocoque Stamas sr r factory. The Stamas rear fairing is made of fiberglass and does not include the internal tank.

Reference: 7006

Brand: STAMAS

Distance internal front hub standard

Distance internal front hub standard 

Reference: supporto-Alfano-Blata

Brand: Blata

Alfano support for Blata minimoto

Reference: 143.740.006

Brand: POLINI

Aluminum support for Polini minimoto 143.740.006

Aluminum support for mini bike tail Polini 910 Rs. Polini Code: 143.740.006

Reference: 143.290.112

Brand: POLINI

Sprocket 12 Teeth Reverse Polini 143.290.112

Sprocket 12 Teeth Reverse Polini. Polini Code: 143.290.112

Reference: 143.010.013

Brand: POLINI

Polini cylinder d.36 5 transfer h2o 143.010.013

Polini minimoto cylinder with piston, water cooling diameter 36 mm 5 ports. 40cc displacement Polini Code: 143.010.013

Reference: Xracing-chiave-frizione

Brand: XRACING

Minibike clutch adjustment wrench

Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.

Reference: FRZ.HM2

Brand: CS Racing

HAMMER GP Cs racing clutch

Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient

Reference: 2011

Brand: STAMAS

Torque steering stops running Stamas

Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.

Reference: 12002

Brand: STAMAS

Stamas minibike high stand

Stamas minibike high stand. Work stand for Stamas mini and midi mini bikes.

Reference: 129

Brand: DM

Front brake disc Grimeca for Dm

New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm

Reference: TCM323

Brand: Tecnominimoto

Gasket kit for Bzm 40cc 2t h2o engine

Gasket kit for Bzm 40 cc 2t h2o engine. Gaskets for Bzm 40 cc 2-stroke minimoto engine, diameter 36 mm, water-cooled. Specific gaskets for Bzm minimoto engine.

Reference: GHR 501.003

Brand: GHR

40cc air Ghr engine (without carburettor, filter and muffler)

40cc air Ghr engine (without carburettor, filter and muffler). 40cc air Ghr engine, the engine does not include the carburetor and exhaust. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes. GHR minimoto engine weight: 5180 grams

Reference: 0H5-5320-00 (USB CABLE COMP.)

Brand: Arianetech

USB cable for Ariane K2RE minibike control unit calibration

USB cable for Ariane K2RE minibike control unit calibration. Cable for connection to the control unit of the Ariane K2RE electric minibike, the cable is necessary for setting the power of the minibike. With the cable and the appropriate program supplied separately, it will be possible to connect to the control unit and calibrate the minibike to your liking.

Reference: 001002A002A0

Brand: DM

Dm mini bike tail in black painted steel

Dm mini bike tail in black painted steel. Standard model for mini and midi.

Reference: 143.340.001

Brand: POLINI

High voltage coil support bracket 143.340.001

Polini minibike high voltage coil support bracket. Polini Code: 143.340.001