- On sale!
- New
- Out-of-Stock
Xmotorstore Payments
Piston Cs 40cc minimoto.
It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston.
The abbreviations R and V indicate the tolerances
R = tolerance 0 + 0.01 mm
V = tolerance 0 - 0.01 mm
Piston Cs 40cc minimoto.
It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston.
The abbreviations R and V indicate the tolerances
R = tolerance 0 + 0.01 mm
V = tolerance 0 - 0.01 mm
Reference: 285.0007
Brand: POLINI
Pair of oil seals for minimoto measuring 15x24x5 racing PTFE / FKM Polini, the most used minimoto oil seals on Cs, Polini, Iame, Bzm, Ghr, Beast, and others. Fluorocarbon oil seals for racing mini bikes, very high thermal resistance and smoothness, ideal for high performance shafts. Oil seal measures: external 24 mm internal 15 mm thickness 5 mm Polini...
Reference: NSK 6202 C4
Brand: XRACING
Pair of bearings minimoto engine Racing NSK C4. The high-slip mini-bike bearings, suitable for competition engines. NSK c4 motor bearings guarantee reliability and very high performance. Recommended application: Cs racing bearings, Iame bearings, Ghr bearings, Polini bearings, Bzm bearings, Tcm bearings, Beast bearings.
Reference: 246215063
Brand: NGK spark plug
Ngk BR9EG candle. Code: BR9EG. Stock No.:3230 Details: Hex: 20.8mm Thread diameter: 14.0mm Thread length: 19.0mm Electrode distance: 0.6 mm Resistance: resistive, 5 KOhm
Reference: IMZ-50992
Brand: CS Racing
Cs 40cc engine gaskets, available: Cs flange 10 gaskets, Cs flange 12 gaskets, Cs flange 15 gaskets.
Reference: 001002R03100
Brand: DM
Universal quick throttle control for minimoto, produced by Dm, compatible with: Stamas, Dm, Blata, Grc, Polini and others. Compatible with 21/22 mm handlebars. Knob length 115 mm. Total length of throttle control 145 mm. Code: 001002R03100.
Reference: 116
Brand: DM
Dm support for Formula floating radial rear hydraulic caliper New lighter version, weight 83g Dm Code: 116
Reference: Deviaflussi-Cs
Brand: CS Racing
Iame CS flow diverter, available with the variants: oval / round diameter 15 or 21.
Reference: FM10126-20
Brand: Formula
Complete left Formula brake pump. Formula Code: FM10126-20
Reference: GHR 037.002
Brand: GHR
Blue Ghr clutch springs 2.3 mm. Ghr code: 037.002 Pair of 2 GHR minimoto clutch springs, suitable for Junior engines.
Reference: FRZ.HM2
Brand: CS Racing
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: 001002R003B0
Brand: DM
rubber kit for fairing Dm 5 pieces. Suitable for original fairings, they allow to reduce the vibrations on the fairing. DM Code: 001002R003B0
Reference: 143.075.012
Brand: POLINI
Carter Polini clutch side open for reverse engine. Polini code: 143.075.012 Carter Polini for: Polini minibike spare parts.
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 143.395.003
Brand: POLINI
Polini throttle cable 143.395.003 . Polini code: 143.395.003 Polini throttle cable for throttle control and SHA 14 carburetor. The throttle cable with sheath is compatible with Polini minimoto and other minimotos that mount SHA carburetor.
Reference: LAM.001
Brand: CS Racing
Fiberglass reed petals for CS minimoto reed valve. Compatible with all Italian minimoto brands. Available in 0.20 - 0.25 - 0.32 - 0.37 mm. Pair of CIV approved CS fibre slats: (select thickness 0.32 for junior A & B CIV & simoncelli single-cylinder engines).
Reference: 6008/12
Brand: STAMAS
Stamas rear fender sr r factory. Code: 6008/12
Reference: 093
Brand: DM
New DM 2021 front fairing in reinforced resin. Minimoto fairing model Dm 2021, compatible with previous models. Dm Code: 093
Piston Cs 40cc minimoto.
It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston.
The abbreviations R and V indicate the tolerances
R = tolerance 0 + 0.01 mm
V = tolerance 0 - 0.01 mm