Xmotorstore Payments
Bearing kit plus spacer for hub Grc
Select the desired measure between: 90/94/110/114.
L.90 front (for mechanical brake)
L.94 front (for hydraulic-mechanical brake)
L.111 rear (for mechanical brake)
L.114 rear (for hydraulic brake)
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: TCM32
Brand: Tecnominimoto
Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.
Reference: M099341-V90
Brand: PMT TYRES
90 ° tubeless valve for minimoto, scooter, and other rims.
Reference: 143.762.013
Brand: POLINI
Seat for fairing 910 s / gp3 (with biadhesive) 143.762.013
Reference: 115.010.022
Brand: BZM
Gasket kit for Bzm 40cc 2t air engine. Gasket kit for Bzm minimoto engine, diameter 36 mm, 40cc, air-cooled. Bzm gaskets compatible with Bzm 420 and 620 engine crankcases. Diameter: 36 mm. Displacement: 40cc. Crankcase: 420 and 620. Cooling: AIR.
Reference: 001002R01400
Brand: DM
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems. DM Code: 001002R01400
Reference: cod. 4506
Brand: PBR
Universal minimoto sprocket in Ergal Black color. The sprocket is to be considered as 3 holes, as the 6 holes are the combination of two types of attack with 3 offset holes. Compatible for: Crown for DM minimoto Crown for GRC minimoto Crown for STAMAS minimoto Crown for BLATA minimoto Crown for MARTINI minimoto Crown for BMS minimoto Crown for universal...
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 001002R075B0
Brand: DM
Universal mini bike stand resistant and practical stand for minimoto support. DM Code: 001002R075B0
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 143.340.040
Brand: POLINI
Polini 910 minibike fairing support brackets. Polini code: 143.340.040 Polini 910 minibike fairing support brackets, set of 2 pieces.
Reference: ZOC.100.0051
Brand: Zocchi
Zocchi clutch for 3.5 hp Chinese minimoto. Clutch elaboration for Chinese minimoto with 3.5 hp engine.
Reference: 144.750.008
Brand: POLINI
Pair of Polini minibike mechanical brake pads, Polini minibike brake pads have a hole distance of 22 mm. CODE: 144.750.008
Reference: 1014
Brand: STAMAS
Pair support platforms Stamas aluminium mini
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Reference: GHR 023.001
Brand: GHR
Ghr factory crankshaft stroke 39.6 with cnc connecting rod. Ghr minibike crankshaft, compatible with almost all Italian minibike engines. Average crankshaft weight Ghr: 735 g.
Bearing kit plus spacer for hub Grc
Select the desired measure between: 90/94/110/114.
L.90 front (for mechanical brake)
L.94 front (for hydraulic-mechanical brake)
L.111 rear (for mechanical brake)
L.114 rear (for hydraulic brake)
